{"title":"Freefoam Joints and Corners","description":null,"products":[{"product_id":"freefoam-300mm-square-upvc-fascia-external-corner-trim-90-degree-roofline-corner-all-colours","title":"Freefoam 300mm Square uPVC Fascia External Corner Trim – 90 Degree Roofline Corner – All Colours","description":"\u003cp\u003eFinish external roofline corners neatly with this trim. Designed for compatible Freefoam square fascia installations, this purpose-made corner piece creates a clean 90° transition where two fascia runs meet, avoiding awkward mitred joints and exposed board edges.\u003c\/p\u003e\n\u003cp\u003eThe 300mm profile can be cut down on site to suit the fascia depth required, making it suitable across a range of square fascia widths. Available in matching solid and foiled finishes, it helps keep the entire roofline looking consistent from straight runs through to corners.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy Use a Freefoam External Fascia Corner?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for 90° external corners\u003c\/strong\u003e\u003cbr\u003eProvides a neat finished detail where two compatible square fascia boards meet around an outside corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner than trying to mitre fascia boards\u003c\/strong\u003e\u003cbr\u003eThe purpose-made trim conceals cut board edges and helps create a more professional roofline finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm profile\u003c\/strong\u003e\u003cbr\u003eGenerous length allows the corner trim to be cut down to suit narrower fascia board depths where required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for Freefoam square fascia systems\u003c\/strong\u003e\u003cbr\u003eDesigned to coordinate with compatible Freefoam fascia boards and roofline accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching colour options\u003c\/strong\u003e\u003cbr\u003eChoose a finish to complement the fascia boards for a consistent appearance around the property.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eProvides a durable finishing detail without the regular painting associated with traditional timber roofline products.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere Is This Trim Used?\u003c\/h3\u003e\n\u003cp\u003eThis is an \u003cstrong\u003eexternal fascia corner\u003c\/strong\u003e, meaning it is used where the roofline turns around an outward-facing 90° corner. Typical examples include corners around extensions, bay-style roof details, garages and other roof edges where two fascia runs meet.\u003c\/p\u003e\n\u003cp\u003eIt should not be confused with an internal corner trim, which is shaped differently and is used where two fascia boards meet inside a recessed corner.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC fascia external corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Square fascia external corner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner type:\u003c\/strong\u003e 90° external\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.09kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e External roofline finishing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComplete the Roofline Properly\u003c\/h3\u003e\n\u003cp\u003eCorners, fascia joints and end caps are small components, but they make a big difference to the finished job. Using the correct Freefoam fascia accessories helps hide cut edges, allows the roofline to change direction neatly and keeps the installation looking consistent.\u003c\/p\u003e\n\u003cp\u003eFor a typical square fascia installation, you may also require matching straight joints, internal corners, end caps and 135° corner trims depending on the shape of the roof.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is this fascia corner used for?\u003c\/strong\u003e\u003cbr\u003eIt is used to finish a 90° external corner where two compatible square fascia runs meet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the trim really 300mm long?\u003c\/strong\u003e\u003cbr\u003eYes. The profile is supplied at 300mm and can be cut down where required to suit the fascia depth being installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same as an internal corner?\u003c\/strong\u003e\u003cbr\u003eNo. External and internal fascia corners are different profiles. This product is specifically for outward-facing 90° corners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I match the trim to coloured fascia?\u003c\/strong\u003e\u003cbr\u003eYes. The range includes White, Anthracite Grey Foil, Black Ash, Cream Foil, Irish Oak, Light Oak and Rosewood options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a corner trim instead of cutting the fascia at 45°?\u003c\/strong\u003e\u003cbr\u003eUsing the purpose-made corner trim is generally the cleaner and easier way to finish the joint, as it covers the board ends and creates a consistent external corner detail.\u003c\/p\u003e\n\u003ch3\u003eA Small Detail That Finishes the Job Properly\u003c\/h3\u003e\n\u003cp\u003eThe Freefoam 300mm Square uPVC Fascia External Corner Trim gives outside roofline corners the clean, finished appearance they need. Easy to cut and available in matching Freefoam colours, it is an essential finishing accessory for achieving a tidy square fascia installation.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"White","offer_id":57466220347767,"sku":"FWX","price":1.64,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey Foil","offer_id":57466220380535,"sku":"FWXWGAG","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57466220413303,"sku":"FWXWGB","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Cream Foil","offer_id":57466220446071,"sku":"FWXWGCR","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Irish Oak","offer_id":57466220478839,"sku":"FWXWGI","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Light Oak","offer_id":57466220511607,"sku":"FWXWGO","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Rosewood","offer_id":57466220544375,"sku":"FWXWGR","price":7.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FWXW_00.jpg?v=1789665595"},{"product_id":"freefoam-300mm-square-upvc-fascia-joint-trim-joiner-straight-fascia-connector-all-colours","title":"Freefoam 300mm Square uPVC Fascia Joint Trim \/ Joiner – Straight Fascia Connector – All Colours","description":"\u003cp\u003eFinish straight fascia runs neatly with the Freefoam 300mm Square uPVC Fascia Joint Trim. Also commonly called a fascia joiner, this trim is designed to cover the meeting point between two compatible Freefoam fascia boards, giving the roofline a cleaner and more professional appearance.\u003c\/p\u003e\n\n\u003cp\u003eThe 300mm length makes it suitable for a wide range of fascia widths and it can be cut down on site where required. Available in White, contemporary coloured finishes and traditional woodgrain options, it is easy to coordinate the joint with the rest of the fascia installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Use a Freefoam Fascia Joint Trim?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreates a neat straight fascia joint\u003c\/strong\u003e\u003cbr\u003eCovers the connection where two fascia boards meet along the same roof run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelps conceal cut board ends\u003c\/strong\u003e\u003cbr\u003eProvides a much cleaner finish than leaving a visible butt joint between fascia lengths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm long profile\u003c\/strong\u003e\u003cbr\u003eSuitable for a range of fascia widths and can be cut down to the required depth on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for Freefoam square fascia systems\u003c\/strong\u003e\u003cbr\u003eMade to coordinate with compatible Freefoam square fascia and roofline products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-matched options\u003c\/strong\u003e\u003cbr\u003eAvailable in White, smooth coloured finishes and woodgrain colours to complement the fascia boards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eProvides a durable finishing detail without regular painting or staining.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat Is a Fascia Joiner Used For?\u003c\/h3\u003e\n\n\u003cp\u003eMost fascia installations need more than one board to complete a full roof run. Where two boards meet end-to-end, this joint trim fits over the connection to create a tidy transition between them.\u003c\/p\u003e\n\n\u003cp\u003eIt is intended for a \u003cstrong\u003estraight fascia joint\u003c\/strong\u003e. It is not an external corner, internal corner or end cap, so make sure the correct Freefoam accessory is selected for each part of the roofline.\u003c\/p\u003e\n\n\u003ch3\u003eAvailable Finishes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eWhite\u003c\/li\u003e\n\u003cli\u003eAnthracite Grey Foil\u003c\/li\u003e\n\u003cli\u003eBlack Ash\u003c\/li\u003e\n\u003cli\u003eCream Foil\u003c\/li\u003e\n\u003cli\u003eIrish Oak\u003c\/li\u003e\n\u003cli\u003eLight Oak\u003c\/li\u003e\n\u003cli\u003eMahogany\u003c\/li\u003e\n\u003cli\u003eRosewood\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC fascia joint trim \/ fascia joiner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Square fascia joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.06kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Straight fascia board joints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eComplete the Roofline Properly\u003c\/h3\u003e\n\n\u003cp\u003eFascia joints may be small components, but they make a noticeable difference to the finished job. Using the correct matching joiner helps keep straight roof runs looking consistent and avoids an unfinished gap between boards.\u003c\/p\u003e\n\n\u003cp\u003eDepending on the roof shape, you may also need matching Freefoam external corners, internal corners, 135-degree corners and end caps.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat does this fascia joint trim do?\u003c\/strong\u003e\u003cbr\u003eIt covers the straight connection between two compatible fascia boards to create a cleaner finished roofline.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the trim 300mm long?\u003c\/strong\u003e\u003cbr\u003eYes. It is supplied at 300mm and can be shortened where required to suit narrower fascia boards.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this the same as a fascia corner?\u003c\/strong\u003e\u003cbr\u003eNo. This is for joining two boards along a straight run. Separate corner trims are used where the roofline changes direction.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I match the joiner to coloured fascia?\u003c\/strong\u003e\u003cbr\u003eYes. The trim is available in a range of solid, coloured foil and woodgrain finishes to complement compatible Freefoam fascia boards.\u003c\/p\u003e\n\n\u003ch3\u003eA Cleaner Finish Between Fascia Boards\u003c\/h3\u003e\n\n\u003cp\u003eThe Freefoam 300mm Square uPVC Fascia Joint Trim is a simple but important roofline accessory, giving straight fascia joints a neat, colour-matched finish and helping the complete installation look properly finished.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"White","offer_id":57466320388471,"sku":"FWJ","price":1.64,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey Foil","offer_id":57466320421239,"sku":"FWJWGAG","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57466320454007,"sku":"FWJWGB","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Cream Foil","offer_id":57466320486775,"sku":"FWJWGCR","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Irish Oak","offer_id":57466320519543,"sku":"FWJWGI","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Mahogany","offer_id":57466320552311,"sku":"FWJWGM","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Light Oak","offer_id":57466320585079,"sku":"FWJWGO","price":7.66,"currency_code":"GBP","in_stock":true},{"title":"Rosewood","offer_id":57466320617847,"sku":"FWJWGR","price":7.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FWJW_00.jpg?v=1789665985"},{"product_id":"freefoam-600mm-square-upvc-fascia-external-corner-trim-90-roofline-corner-all-colours","title":"Freefoam 600mm Double-Ended Square uPVC Fascia External Corner Trim – 90 Degree Corner for Deep Fascia – All Colours","description":"\u003cp\u003eThe Freefoam 600mm Double-Ended Square uPVC Fascia External Corner Trim is designed to finish an outward-facing 90° roofline corner on deeper square fascia installations. It covers the point where two fascia runs meet around the outside corner of a building, concealing the board ends and creating a clean, colour-matched finish.\u003c\/p\u003e\n\n\u003cp\u003eThis is \u003cstrong\u003enot simply the longer version of the standard 300mm corner trim\u003c\/strong\u003e. The 600mm FWXX profile is Freefoam's double-ended external corner, designed for deeper fascia applications where the standard 300mm external corner is not suitable.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Is This Trim Used For?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e90° external roofline corners\u003c\/strong\u003e\u003cbr\u003eUsed where two square fascia runs meet around an outward-facing corner of a house, extension, garage or other roof structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeeper fascia installations\u003c\/strong\u003e\u003cbr\u003eThe 600mm double-ended profile is intended for wider and deeper fascia details where additional coverage is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing exposed board ends\u003c\/strong\u003e\u003cbr\u003eCovers the junction between the fascia boards so the corner does not rely on exposed cut edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreating a consistent roofline\u003c\/strong\u003e\u003cbr\u003eAvailable in matching Freefoam colours and foil finishes for a coordinated appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e300mm or 600mm External Corner?\u003c\/h3\u003e\n\n\u003cp\u003eFreefoam produces two different square external corner accessories, so it is important to select the correct one.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm Square External Corner\u003c\/strong\u003e\u003cbr\u003eThe standard single external corner trim used for normal fascia depths up to approximately 300mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600mm Square Double-Ended External Corner\u003c\/strong\u003e\u003cbr\u003eA separate double-ended corner profile designed for deeper fascia applications above the standard 300mm range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you are using a standard 150mm, 175mm, 200mm, 225mm, 250mm or 300mm fascia, the 300mm external corner will normally be the relevant accessory. For deeper or double-ended fascia details, this 600mm version is the product to consider.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Use the Correct Fascia Corner Trim?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-made external corner\u003c\/strong\u003e\u003cbr\u003eCreates a much neater result than trying to form the corner entirely from cut fascia boards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-ended design\u003c\/strong\u003e\u003cbr\u003eProvides the extra coverage required for deeper square fascia profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo regular painting or staining is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-matched finish\u003c\/strong\u003e\u003cbr\u003eCoordinates with compatible Freefoam square fascia and Reveal Cover Board systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut where required\u003c\/strong\u003e\u003cbr\u003eThe trim can be carefully adjusted on site to suit the particular roofline detail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAvailable Colours\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eWhite\u003c\/li\u003e\n\u003cli\u003eAnthracite Grey Foil\u003c\/li\u003e\n\u003cli\u003eBlack Ash\u003c\/li\u003e\n\u003cli\u003eCream Foil\u003c\/li\u003e\n\u003cli\u003eIrish Oak\u003c\/li\u003e\n\u003cli\u003eLight Oak\u003c\/li\u003e\n\u003cli\u003eRosewood\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Double-ended uPVC fascia external corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Square fascia\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner type:\u003c\/strong\u003e 90° external\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 600mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.17kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Deep fascia and roofline corner finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eExternal Corner, Joint or Internal Corner?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal corner\u003c\/strong\u003e\u003cbr\u003eUsed where the fascia wraps around the outside of a building.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal corner\u003c\/strong\u003e\u003cbr\u003eUsed where two fascia runs meet within a recessed inward-facing corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFascia joint \/ joiner\u003c\/strong\u003e\u003cbr\u003eUsed where two fascia boards meet end-to-end along one straight roof run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd cap\u003c\/strong\u003e\u003cbr\u003eUsed to finish an exposed fascia end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this the same product as the Freefoam 300mm external corner?\u003c\/strong\u003e\u003cbr\u003eNo. They perform the same general job at an external corner, but the 600mm FWXX is a double-ended profile intended for deeper fascia applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this a 90° corner?\u003c\/strong\u003e\u003cbr\u003eYes. It is designed to finish an outward-facing square roofline corner.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhen should I use the 600mm version?\u003c\/strong\u003e\u003cbr\u003eIt is primarily intended where the fascia depth exceeds the normal range suited to the standard 300mm corner trim.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I match it to coloured fascia?\u003c\/strong\u003e\u003cbr\u003eYes. It is available in White and a selection of matching foil and woodgrain finishes.\u003c\/p\u003e\n\n\u003ch3\u003eDesigned for Deeper Square Fascia Corners\u003c\/h3\u003e\n\n\u003cp\u003eThe Freefoam 600mm Double-Ended Square Fascia External Corner Trim is the correct finishing accessory when a deeper square fascia installation turns around an outside corner. It provides greater coverage than the standard 300mm trim and keeps the corner looking clean, properly finished and consistent with the rest of the Freefoam roofline.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"White","offer_id":57466355810679,"sku":"FWXX","price":3.09,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey Foil","offer_id":57466355843447,"sku":"FWXXWGAG","price":10.96,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57466355876215,"sku":"FWXXWGB","price":10.96,"currency_code":"GBP","in_stock":true},{"title":"Cream Foil","offer_id":57466355908983,"sku":"FWXXWGCR","price":10.96,"currency_code":"GBP","in_stock":true},{"title":"Irish Oak","offer_id":57466355941751,"sku":"FWXXWGI","price":10.96,"currency_code":"GBP","in_stock":true},{"title":"Light Oak","offer_id":57466356007287,"sku":"FWXXWGO","price":10.96,"currency_code":"GBP","in_stock":true},{"title":"Rosewood","offer_id":57466356040055,"sku":"FWXXWGR","price":10.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FWXXW_00.jpg?v=1789666627"},{"product_id":"freefoam-600mm-double-ended-square-upvc-fascia-joint-trim-joiner-straight-roofline-connector-all-colours","title":"Freefoam 600mm Double-Ended Square uPVC Fascia Joint Trim \/ Joiner – Straight Roofline Connector – All Colours","description":"\u003cp\u003eThe Freefoam 600mm Double-Ended Square uPVC Fascia Joint Trim is a specialist straight joiner designed to finish the connection between two compatible square fascia boards along the same roof run. It sits over the board ends at the joint, helping conceal the cut edges and creating a much cleaner, colour-matched finish.\u003c\/p\u003e\n\u003cp\u003eAt 600mm long, this is the deeper joint option within the Freefoam square fascia system. It is intended for larger or double-ended fascia applications where the standard 300mm fascia joiner does not provide sufficient coverage.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat Is This 600mm Fascia Joint Used For?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoining two fascia boards on a straight run\u003c\/strong\u003e\u003cbr\u003eUsed where one fascia length ends and the next board continues in the same direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for deeper fascia applications\u003c\/strong\u003e\u003cbr\u003eThe 600mm profile provides substantially more coverage than the standard 300mm square fascia joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers the board connection\u003c\/strong\u003e\u003cbr\u003eHelps hide the cut ends of adjoining fascia boards and gives the roofline a more professional appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-matched roofline finish\u003c\/strong\u003e\u003cbr\u003eAvailable in matching Freefoam colours and woodgrain finishes so the joint blends naturally with the surrounding fascia.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e600mm Joint vs 300mm Joint\u003c\/h3\u003e\n\u003cp\u003eFreefoam offers both 300mm and 600mm square fascia joint trims, but they are intended for different fascia depths.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm Square Fascia Joint\u003c\/strong\u003e\u003cbr\u003eThe standard joiner used across conventional fascia board widths.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600mm Double-Ended Square Fascia Joint\u003c\/strong\u003e\u003cbr\u003eThe deeper joiner for larger fascia profiles and double-ended roofline applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 600mm measurement refers to the overall length of the joint trim. It does not mean the fascia board itself must be exactly 600mm wide.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eImportant: This Is a Straight Joint, Not a Corner\u003c\/h3\u003e\n\u003cp\u003eThis trim is used only where two fascia boards meet \u003cstrong\u003eend-to-end along one straight roofline\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight fascia joint\u003c\/strong\u003e – use this 600mm joint trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90° outward-facing corner\u003c\/strong\u003e – use the matching external corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessed inward-facing corner\u003c\/strong\u003e – use an internal corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExposed fascia end\u003c\/strong\u003e – use a fascia end cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis distinction is important because the 600mm joint and 600mm external corner can look quite similar in product photographs, but they perform completely different jobs!\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC fascia joint trim \/ fascia joiner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Double-ended square fascia joint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Straight fascia board connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 600mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.13kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour options:\u003c\/strong\u003e White and selected foil \/ woodgrain finishes\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Use the Correct Fascia Joiner?\u003c\/h3\u003e\n\u003cp\u003eTrying to leave two fascia boards simply butted together can make the roofline look unfinished and leave the board ends clearly visible. A purpose-made Freefoam fascia joiner covers that transition and keeps the installation looking consistent from one board length to the next.\u003c\/p\u003e\n\u003cp\u003eUsing the correct 600mm joint is particularly important on deeper fascia profiles, where a shorter standard joiner may not cover the full board depth properly.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this trim actually do?\u003c\/strong\u003e\u003cbr\u003eIt joins and finishes the connection between two compatible square fascia boards running in a straight line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same as the 600mm external corner?\u003c\/strong\u003e\u003cbr\u003eNo. The two trims can look similar, but the external corner is used where the fascia changes direction around a 90° outside corner. This product is for a straight board-to-board joint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is it 600mm long?\u003c\/strong\u003e\u003cbr\u003eThe additional length allows it to cover deeper fascia profiles and double-ended roofline applications where a standard 300mm joint would be too short.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I match it to coloured fascia?\u003c\/strong\u003e\u003cbr\u003eYes. It is available in White, Anthracite Grey Foil, Black Ash, Cream Foil, Irish Oak, Light Oak and Rosewood.\u003c\/p\u003e\n\u003ch3\u003eMade for Clean Straight Joints on Deeper Fascia\u003c\/h3\u003e\n\u003cp\u003eThe Freefoam 600mm Double-Ended Square uPVC Fascia Joint Trim is the correct accessory when two deeper square fascia boards meet along the same straight roof run. It conceals the connection, matches the surrounding fascia and gives larger roofline installations the clean, properly finished appearance they need.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"White","offer_id":57466470957431,"sku":"FWJJ","price":3.09,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey Foil","offer_id":57466470990199,"sku":"FWJJWGAG","price":10.96,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57466471022967,"sku":"FWJJWGB","price":10.96,"currency_code":"GBP","in_stock":true},{"title":"Cream Foil","offer_id":57466471055735,"sku":"FWJJWGCR","price":10.96,"currency_code":"GBP","in_stock":true},{"title":"Irish Oak","offer_id":57466471088503,"sku":"FWJJWGI","price":10.96,"currency_code":"GBP","in_stock":true},{"title":"Light Oak","offer_id":57466471121271,"sku":"FWJJWGO","price":10.96,"currency_code":"GBP","in_stock":true},{"title":"Rosewood","offer_id":57466471154039,"sku":"FWJJWGR","price":10.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FWJJW_00.jpg?v=1789666996"},{"product_id":"freefoam-300mm-square-upvc-fascia-internal-corner-trim-90-internal-roofline-corner-all-colours","title":"Freefoam 300mm Square uPVC Fascia Internal Corner Trim – 90 Degree Internal Roofline Corner – All Colours","description":"\u003cp\u003eThe Freefoam 300mm Square uPVC Fascia Internal Corner Trim is designed to create a clean, professional finish where two compatible square fascia runs meet at an inward-facing 90° roofline corner. It covers the cut ends of the fascia boards and gives the recessed corner a neat, colour-matched finish.\u003c\/p\u003e\n\n\u003cp\u003eThis is the correct trim for internal corners on Freefoam square fascia installations. It should not be confused with an external corner, which is used where the roofline wraps around the outside of a building.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Use the Freefoam 300mm Internal Fascia Corner?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for 90° internal corners\u003c\/strong\u003e\u003cbr\u003eUsed where two square fascia runs meet inside a recessed or inward-facing roofline corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreates a cleaner finish\u003c\/strong\u003e\u003cbr\u003eCovers cut fascia edges and removes the need to leave an exposed or awkward-looking board junction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm length\u003c\/strong\u003e\u003cbr\u003eProvides useful coverage across standard fascia depths and can be cut down on site where required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for Freefoam square fascia systems\u003c\/strong\u003e\u003cbr\u003eDesigned to coordinate with compatible Freefoam fascia boards and roofline accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable in matching colours\u003c\/strong\u003e\u003cbr\u003eChoose the finish that matches your fascia boards for a consistent look around the property.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eProvides a durable finishing detail without regular painting or staining.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat Is an Internal Fascia Corner?\u003c\/h3\u003e\n\n\u003cp\u003eAn internal corner is formed where two roofline sections meet inside a recessed angle. Common examples include L-shaped extensions, returns in the roofline and areas where one elevation meets another inside a corner.\u003c\/p\u003e\n\n\u003cp\u003eThe trim sits over the meeting point between the fascia boards, helping keep the corner neat while maintaining the same finish as the rest of the roofline.\u003c\/p\u003e\n\n\u003ch3\u003eInternal Corner vs External Corner\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal corner trim\u003c\/strong\u003e\u003cbr\u003eUsed where the fascia meets inside a recessed 90° corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal corner trim\u003c\/strong\u003e\u003cbr\u003eUsed where the fascia wraps around an outward-facing 90° corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFascia joint \/ joiner\u003c\/strong\u003e\u003cbr\u003eUsed where two fascia boards meet end-to-end along a straight roof run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd cap\u003c\/strong\u003e\u003cbr\u003eUsed to finish an exposed fascia end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eChoosing the correct trim is important because each profile is shaped differently for its specific roofline detail.\u003c\/p\u003e\n\n\u003ch3\u003eAvailable Colours\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eWhite\u003c\/li\u003e\n\u003cli\u003eAnthracite Grey Foil\u003c\/li\u003e\n\u003cli\u003eBlack Ash\u003c\/li\u003e\n\u003cli\u003eCream Foil\u003c\/li\u003e\n\u003cli\u003eIrish Oak\u003c\/li\u003e\n\u003cli\u003eLight Oak\u003c\/li\u003e\n\u003cli\u003eRosewood\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC fascia internal corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Square fascia\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner type:\u003c\/strong\u003e 90° internal corner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Internal roofline corner finishing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Guidance\u003c\/h3\u003e\n\n\u003cp\u003eOffer the trim up to the finished internal corner before cutting so you can check the required length and position. The fascia boards should already be correctly aligned and installed before the corner trim is fitted.\u003c\/p\u003e\n\n\u003cp\u003eThe 300mm trim can be shortened where necessary to suit narrower fascia board depths.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is this trim used for?\u003c\/strong\u003e\u003cbr\u003eIt is used to finish a 90° inward-facing corner where two compatible square fascia runs meet.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this the same as the external corner trim?\u003c\/strong\u003e\u003cbr\u003eNo. The external corner is shaped for outward-facing corners. This trim is specifically for recessed internal corners.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan the 300mm trim be cut down?\u003c\/strong\u003e\u003cbr\u003eYes. It can be cut on site to suit the depth of the fascia installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I match it to coloured fascia?\u003c\/strong\u003e\u003cbr\u003eYes. The trim is available in a range of solid, foiled and woodgrain finishes to complement compatible Freefoam fascia boards.\u003c\/p\u003e\n\n\u003ch3\u003eA Neat Finish for Recessed Roofline Corners\u003c\/h3\u003e\n\n\u003cp\u003eThe Freefoam 300mm Square uPVC Fascia Internal Corner Trim is a simple but important finishing accessory for square fascia installations. It conceals cut board edges, keeps the roofline looking consistent and gives inward-facing 90° corners the clean finish they need.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"White","offer_id":57468728050039,"sku":"FWXI","price":3.36,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey Foil","offer_id":57468728082807,"sku":"FWXIWGAG","price":11.61,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57468728115575,"sku":"FWXIWGB","price":11.61,"currency_code":"GBP","in_stock":true},{"title":"Cream Foil","offer_id":57468728148343,"sku":"FWXIWGCR","price":11.61,"currency_code":"GBP","in_stock":true},{"title":"Irish Oak","offer_id":57468728181111,"sku":"FWXIWGI","price":11.61,"currency_code":"GBP","in_stock":true},{"title":"Light Oak","offer_id":57468728213879,"sku":"FWXIWGO","price":11.61,"currency_code":"GBP","in_stock":true},{"title":"Rosewood","offer_id":57468728246647,"sku":"FWXIWGR","price":11.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FWXIW_00.jpg?v=1789722524"},{"product_id":"freefoam-300mm-135-degree-square-upvc-fascia-external-corner-trim-angled-roofline-corner-all-colours","title":"Freefoam 300mm 135 Degree Square uPVC Fascia External Corner Trim – Angled Roofline Corner – All Colours","description":"\u003cp\u003eThe Freefoam 300mm 135° Square uPVC Fascia External Corner Trim is designed specifically for \u003cstrong\u003eangled external roofline corners where two compatible square fascia runs meet at 135 degrees\u003c\/strong\u003e. It provides a neat, purpose-made finish around splayed roof details where a standard 90° external corner trim would not fit correctly.\u003c\/p\u003e\n\n\u003cp\u003eCommonly used around angled extensions, bay-style rooflines and other non-square building details, the trim covers the meeting point between the fascia boards, hiding cut edges and maintaining a clean, colour-matched finish around the change in direction.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Is This 135° Fascia Corner Used For?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e135° external roofline corners\u003c\/strong\u003e\u003cbr\u003eDesigned for outward-facing angled corners rather than conventional square 90° corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplayed and angled roof details\u003c\/strong\u003e\u003cbr\u003eParticularly useful where the fascia follows a roofline that changes direction at an angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers cut fascia board ends\u003c\/strong\u003e\u003cbr\u003eCreates a cleaner junction and avoids leaving unfinished board edges visible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatches compatible Freefoam square fascia\u003c\/strong\u003e\u003cbr\u003eHelps maintain a consistent finish across the complete roofline system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e135° Corner or Standard 90° Corner?\u003c\/h3\u003e\n\n\u003cp\u003eThis trim should only be used where the roofline requires a 135° external corner.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e90° External Corner\u003c\/strong\u003e\u003cbr\u003eUsed where the fascia wraps around a conventional square outside corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e135° External Corner\u003c\/strong\u003e\u003cbr\u003eUsed where the fascia changes direction around a shallower, angled external corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e135° Internal Corner\u003c\/strong\u003e\u003cbr\u003eA separate profile used for the corresponding inward-facing angled roofline junction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 135° external and internal trims may look similar in product photographs, but they are shaped differently and are not interchangeable.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Use a Purpose-Made 135° Corner?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner than forming the corner manually\u003c\/strong\u003e\u003cbr\u003eThe pre-formed profile covers the junction and gives the roofline a more professional appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for angled fascia layouts\u003c\/strong\u003e\u003cbr\u003eA better fit for non-square corners than adapting a standard 90° trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm length\u003c\/strong\u003e\u003cbr\u003eProvides useful coverage and can be cut down where required to suit the fascia depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo painting or staining is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-matched options\u003c\/strong\u003e\u003cbr\u003eAvailable in finishes designed to coordinate with compatible Freefoam fascia boards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAvailable Colours\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eWhite\u003c\/li\u003e\n\u003cli\u003eAnthracite Grey Foil\u003c\/li\u003e\n\u003cli\u003eBlack Ash\u003c\/li\u003e\n\u003cli\u003eLight Oak\u003c\/li\u003e\n\u003cli\u003eRosewood\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC fascia external corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Square fascia\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner angle:\u003c\/strong\u003e 135° external\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.13kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Angled external roofline corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere Might a 135° External Corner Be Needed?\u003c\/h3\u003e\n\n\u003cp\u003eMost simple rooflines use 90° corners, but some properties include angled sections where the fascia follows a splayed building line. These can include bay-style projections, angled extensions and other roof details that do not meet at a conventional square corner.\u003c\/p\u003e\n\n\u003cp\u003eUsing the correct 135° fascia trim keeps these areas looking deliberate and avoids trying to force a standard external corner onto the wrong angle.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this the same as the standard Freefoam external corner?\u003c\/strong\u003e\u003cbr\u003eNo. The standard external corner is designed for 90° corners. This version is specifically formed for a 135° external roofline junction.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this an internal or external corner?\u003c\/strong\u003e\u003cbr\u003eThis product is the external version. A separate 135° internal fascia corner is available for inward-facing angled junctions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat does the 300mm measurement mean?\u003c\/strong\u003e\u003cbr\u003eIt refers to the length of the corner trim. The profile can be cut down on site if a shorter section is required.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan this be used with coloured fascia?\u003c\/strong\u003e\u003cbr\u003eYes. Select the matching colour option to coordinate the corner with compatible Freefoam fascia boards.\u003c\/p\u003e\n\n\u003ch3\u003eMade for Angled External Roofline Corners\u003c\/h3\u003e\n\n\u003cp\u003eThe Freefoam 300mm 135° Square uPVC Fascia External Corner Trim is the correct finishing piece when a square fascia installation turns around an angled outside corner. It hides the board junction, follows the 135° roofline correctly and gives splayed fascia details a much cleaner, more professional finish.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"White","offer_id":57468778414455,"sku":"FWFX","price":5.37,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey Foil","offer_id":57468778447223,"sku":"FWFXWGAG","price":15.83,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57468778479991,"sku":"FWFXWGB","price":15.83,"currency_code":"GBP","in_stock":true},{"title":"Light Oak","offer_id":57468778578295,"sku":"FWFXWGO","price":15.83,"currency_code":"GBP","in_stock":true},{"title":"Rosewood","offer_id":57468778611063,"sku":"FWFXWGR","price":15.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FWFXW_00.jpg?v=1789722819"},{"product_id":"freefoam-300mm-135-degree-square-upvc-fascia-internal-corner-trim-angled-internal-roofline-corner-all-colours","title":"Freefoam 300mm 135 Degree Square uPVC Fascia Internal Corner Trim – Angled Internal Roofline Corner – All Colours","description":"\u003cp\u003eThe Freefoam 300mm 135° Square uPVC Fascia Internal Corner Trim is designed to finish \u003cstrong\u003einward-facing angled roofline corners where two compatible square fascia runs meet at 135 degrees\u003c\/strong\u003e. It covers the meeting point between the boards, concealing cut edges and creating a neat, colour-matched transition through the angled section of the roofline.\u003c\/p\u003e\n\n\u003cp\u003eThis is the \u003cstrong\u003einternal version\u003c\/strong\u003e of the 135° fascia corner. It is used on recessed or inward-facing angles and should not be confused with the separate 135° external corner trim used around projecting outside corners.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Is This 135° Internal Corner Used For?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e135° internal roofline junctions\u003c\/strong\u003e\u003cbr\u003ePurpose-made for fascia runs that meet inside a shallow, angled corner rather than a standard square 90° corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplayed and angled building details\u003c\/strong\u003e\u003cbr\u003eUseful on properties with non-square extensions, bay-style roof details and other angled rooflines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers fascia board ends\u003c\/strong\u003e\u003cbr\u003eHides the cut edges where the two boards meet and gives the junction a much cleaner finished appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatches compatible Freefoam square fascia\u003c\/strong\u003e\u003cbr\u003eAvailable in coordinating finishes so the corner blends naturally with the surrounding roofline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e135° Internal vs 135° External Corner\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e135° Internal Corner\u003c\/strong\u003e\u003cbr\u003eUsed where two fascia runs meet inside an inward-facing or recessed angled corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e135° External Corner\u003c\/strong\u003e\u003cbr\u003eUsed where fascia wraps around a projecting outward-facing angled corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90° Internal Corner\u003c\/strong\u003e\u003cbr\u003eUsed where the recessed corner is a conventional square angle rather than 135°.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe internal and external trims can look very similar in product images, but their profiles are formed in opposite directions and they are not interchangeable.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Use the Correct Angled Fascia Trim?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-made 135° profile\u003c\/strong\u003e\u003cbr\u003eFits the angle properly rather than trying to adapt a standard 90° corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner finished roofline\u003c\/strong\u003e\u003cbr\u003eConceals board joints and exposed cuts around an awkward change in direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm length\u003c\/strong\u003e\u003cbr\u003eProvides useful coverage across standard fascia depths and can be trimmed on site where required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo painting or staining is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-matched finish\u003c\/strong\u003e\u003cbr\u003eHelps keep the roofline visually consistent through the angled corner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAvailable Colours\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eWhite\u003c\/li\u003e\n\u003cli\u003eAnthracite Grey Foil\u003c\/li\u003e\n\u003cli\u003eBlack Ash\u003c\/li\u003e\n\u003cli\u003eLight Oak\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC fascia internal corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Square fascia\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner angle:\u003c\/strong\u003e 135° internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.13kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Angled internal roofline corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere Would You Typically Need One?\u003c\/h3\u003e\n\n\u003cp\u003eMost straightforward rooflines use 90° corners, but not every property is built on square lines. Where an extension, bay or other part of the building creates a shallower internal angle, this 135° trim allows the fascia to follow that shape neatly.\u003c\/p\u003e\n\n\u003cp\u003eUsing the correct pre-formed corner is much easier than trying to fabricate the detail from straight fascia trims, and gives the finished installation a more professional appearance.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this the same as the 135° external fascia corner?\u003c\/strong\u003e\u003cbr\u003eNo. This is shaped for an inward-facing angled corner. The external version is designed for a projecting outside corner.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this for a standard 90° internal corner?\u003c\/strong\u003e\u003cbr\u003eNo. Freefoam offers a separate 90° internal corner trim. This product is specifically formed for 135° roofline angles.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat does the 300mm measurement refer to?\u003c\/strong\u003e\u003cbr\u003eIt is the length of the fascia corner trim. It can be cut down where required to suit the fascia depth.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use it with coloured fascia?\u003c\/strong\u003e\u003cbr\u003eYes. Choose the corresponding finish to match compatible Freefoam square fascia boards.\u003c\/p\u003e\n\n\u003ch3\u003eThe Correct Finish for Angled Internal Corners\u003c\/h3\u003e\n\n\u003cp\u003eThe Freefoam 300mm 135° Square uPVC Fascia Internal Corner Trim is a small but important accessory where a roofline turns through a non-standard inward angle. It follows the 135° junction correctly, covers the fascia board ends and keeps the finished roofline neat and consistent.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"White","offer_id":57468826255735,"sku":"FWFXI","price":6.18,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey Foil","offer_id":57468826288503,"sku":"FWFXIWGAG","price":15.83,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57468826321271,"sku":"FWFXIWGB","price":15.83,"currency_code":"GBP","in_stock":true},{"title":"Light Oak","offer_id":57468826354039,"sku":"FWFXIWGO","price":15.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FWFXIW_00_72de9c97-3816-4285-aaac-c67fc081a253.jpg?v=1789723091"},{"product_id":"freefoam-300mm-square-upvc-fascia-end-cap-exposed-roofline-end-finishing-trim-all-colours","title":"Freefoam 300mm Square uPVC Fascia End Cap – Exposed Roofline End Finishing Trim – All Colours","description":"\u003cp\u003eThe Freefoam 300mm Square uPVC Fascia End Cap is designed to neatly finish an exposed end of a compatible Freefoam fascia run. Rather than leaving the cut end of the fascia board visible, the end cap fits over the open edge to create a clean, colour-matched finish at the end of the roofline.\u003c\/p\u003e\n\u003cp\u003eIt is a small finishing component, but an important one where the fascia terminates rather than continuing into a joint or around a corner. Supplied at 300mm long, the trim can be cut down on site to suit the depth of the fascia board being installed.\u003c\/p\u003e\n\u003ch3\u003eWhat Is This Fascia End Cap Used For?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing an exposed fascia end\u003c\/strong\u003e\u003cbr\u003eUsed where a fascia run stops and the cut end of the board would otherwise remain visible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreates a cleaner roofline finish\u003c\/strong\u003e\u003cbr\u003eCovers the open board edge and gives the installation a more complete, professional appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm length\u003c\/strong\u003e\u003cbr\u003eProvides enough material for a wide range of fascia depths and can be trimmed down where required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-matched finish\u003c\/strong\u003e\u003cbr\u003eAvailable in coordinating Freefoam finishes so the end cap blends with the surrounding fascia.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo painting or staining is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhere Would You Use an End Cap?\u003c\/h3\u003e\n\u003cp\u003eAn end cap is used at the point where the fascia board finishes completely. Typical examples include the end of a roof run, certain gable or verge details, garages, porches, extensions and other roofline sections where the fascia does not continue into another board.\u003c\/p\u003e\n\u003cp\u003eIt is designed to hide the exposed board end rather than join two fascia boards together.\u003c\/p\u003e\n\u003ch3\u003eEnd Cap, Joint or Corner?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFascia end cap\u003c\/strong\u003e\u003cbr\u003eFinishes the exposed end of a fascia board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFascia joint \/ joiner\u003c\/strong\u003e\u003cbr\u003eConnects and finishes two fascia boards meeting end-to-end along a straight run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal corner\u003c\/strong\u003e\u003cbr\u003eUsed where fascia wraps around an outward-facing corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal corner\u003c\/strong\u003e\u003cbr\u003eUsed where fascia runs meet inside a recessed corner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the fascia simply stops and you can see the cut edge, this is the type of trim you need.\u003c\/p\u003e\n\u003ch3\u003eAvailable Colours\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWhite\u003c\/li\u003e\n\u003cli\u003eAnthracite Grey Foil\u003c\/li\u003e\n\u003cli\u003eBlack Ash\u003c\/li\u003e\n\u003cli\u003eRosewood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC fascia end cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Square fascia finishing trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.04kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Finishing exposed fascia board ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Use the Proper Fascia End Cap?\u003c\/h3\u003e\n\u003cp\u003eLeaving the cut end of a fascia board exposed can make an otherwise tidy roofline look unfinished. A purpose-made end cap conceals that edge and continues the colour and finish around the end of the board.\u003c\/p\u003e\n\u003cp\u003eBecause the trim is supplied at 300mm, it can be measured against the fascia depth and carefully shortened on site before fitting.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this fascia end cap do?\u003c\/strong\u003e\u003cbr\u003eIt covers and finishes the exposed end of a compatible square fascia board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this used to join two fascia boards?\u003c\/strong\u003e\u003cbr\u003eNo. A fascia joint or joiner is used between two boards. This product is specifically for the end of a fascia run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the fascia need to be 300mm wide?\u003c\/strong\u003e\u003cbr\u003eNo. The 300mm measurement refers to the length of the end cap. It can be cut down to suit narrower fascia depths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I match it to coloured fascia?\u003c\/strong\u003e\u003cbr\u003eYes. Matching White, Anthracite Grey Foil, Black Ash and Rosewood options are available within this stocked range.\u003c\/p\u003e\n\u003ch3\u003eThe Finishing Touch for Exposed Fascia Ends\u003c\/h3\u003e\n\u003cp\u003eThe Freefoam 300mm Square uPVC Fascia End Cap gives the end of a roofline the neat finish it needs. It hides the cut board edge, matches the surrounding fascia and can be trimmed to suit the required depth, making it a simple but essential finishing accessory for a professional-looking installation.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"White","offer_id":57468887695735,"sku":"FWDCW","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey Foil","offer_id":57468887728503,"sku":"FWDCWGAG","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57468887761271,"sku":"FWDCWGB","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Rosewood","offer_id":57468887794039,"sku":"FWDCWGR","price":13.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FWDCW_00.jpg?v=1789723338"},{"product_id":"freefoam-600mm-double-ended-ogee-upvc-fascia-external-corner-trim-deep-roofline-corner-white","title":"Freefoam 600mm Double-Ended Ogee uPVC Fascia External Corner Trim – Deep Roofline Corner – White","description":"\u003cp\u003eThe Freefoam 600mm Double-Ended Ogee uPVC Fascia External Corner Trim is designed to neatly finish an outside corner on deeper Freefoam Ogee fascia installations. It covers the junction where two Ogee fascia runs meet around an external corner, concealing the cut board edges and continuing the distinctive curved Ogee profile through the change in direction.\u003c\/p\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e600mm double-ended version\u003c\/strong\u003e, intended for deeper fascia and roofline details where the standard 300mm Ogee corner does not provide enough coverage. It is stocked in White to match the Freefoam Ogee fascia range.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhat Is This Ogee Corner Used For?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Ogee fascia corners\u003c\/strong\u003e\u003cbr\u003eUsed where two compatible Ogee fascia boards meet around an outward-facing roofline corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeeper fascia applications\u003c\/strong\u003e\u003cbr\u003eThe 600mm double-ended profile provides considerably more coverage than the standard 300mm Ogee corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintaining the Ogee profile\u003c\/strong\u003e\u003cbr\u003eIts shaped lower section follows the decorative curved fascia design, giving the corner a consistent finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcealing cut board edges\u003c\/strong\u003e\u003cbr\u003eCovers the meeting point between the fascia boards so the finished corner looks clean and intentional.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e600mm Ogee Corner vs 300mm Ogee Corner\u003c\/h3\u003e\n\u003cp\u003eFreefoam offers both standard and deeper Ogee corner trims, and choosing the correct one is important.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm Ogee External Corner\u003c\/strong\u003e\u003cbr\u003eDesigned for standard Ogee fascia depths and more typical roofline installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600mm Double-Ended Ogee External Corner\u003c\/strong\u003e\u003cbr\u003eDesigned for deeper or double-ended Ogee fascia details where additional coverage is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 600mm measurement refers to the overall length of the corner trim, not the width of the fascia board.\u003c\/p\u003e\n\u003ch3\u003eWhy Use a Profile-Specific Ogee Corner?\u003c\/h3\u003e\n\u003cp\u003eOgee fascia has a distinctive decorative curved lower edge, so a standard square fascia corner will not give the same finish. This purpose-made Ogee corner follows the fascia profile and keeps the moulded detail consistent around the roofline.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for Freefoam Ogee fascia\u003c\/li\u003e\n\u003cli\u003eCreates a cleaner finish than manually forming the corner\u003c\/li\u003e\n\u003cli\u003eMaintains the decorative curved roofline profile\u003c\/li\u003e\n\u003cli\u003eLow-maintenance uPVC construction\u003c\/li\u003e\n\u003cli\u003eCan be carefully cut where required to suit the installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e FOXXW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Ogee fascia external corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Double-ended Ogee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 600mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.18kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e uPVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e External corners on deeper Ogee fascia installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExternal Corner, Joint or Internal Corner?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee external corner\u003c\/strong\u003e\u003cbr\u003eUsed where the roofline wraps around an outward-facing corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee internal corner\u003c\/strong\u003e\u003cbr\u003eUsed where two fascia runs meet inside a recessed corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee joint \/ joiner\u003c\/strong\u003e\u003cbr\u003eUsed where two fascia boards meet end-to-end along a straight roof run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese trims can appear quite similar in product photographs, but each is formed for a different part of the roofline and should not be treated as interchangeable.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same as the 300mm Ogee corner?\u003c\/strong\u003e\u003cbr\u003eNo. This is the longer 600mm double-ended Ogee external corner, intended for deeper fascia applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a straight fascia joiner?\u003c\/strong\u003e\u003cbr\u003eNo. This product is an external corner trim. A separate Ogee fascia joint is used where two boards meet along a straight roof run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat colour is available?\u003c\/strong\u003e\u003cbr\u003eThis stocked 600mm Ogee corner is supplied in White.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be cut?\u003c\/strong\u003e\u003cbr\u003eYes. Where necessary, the trim can be carefully cut on site to suit the particular fascia depth and roofline detail.\u003c\/p\u003e\n\u003ch3\u003eThe Correct Corner for Deeper Ogee Fascia\u003c\/h3\u003e\n\u003cp\u003eThe Freefoam 600mm Double-Ended Ogee Fascia External Corner Trim provides the extra coverage needed on deeper Ogee roofline details while maintaining the curved decorative profile around the corner. It is a small component, but using the correct shaped trim makes a noticeable difference to the finished installation.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57468959719799,"sku":"FOXX","price":4.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FOXXW_01.jpg?v=1789723754"},{"product_id":"freefoam-300mm-ogee-upvc-fascia-external-corner-trim-90-decorative-roofline-corner-white","title":"Freefoam 300mm Ogee uPVC Fascia External Corner Trim – 90° Decorative Roofline Corner – White","description":"\u003cp\u003eThe Freefoam 300mm Ogee uPVC Fascia External Corner Trim is designed to neatly finish a standard outward-facing corner where two compatible Freefoam Ogee fascia boards meet. Its moulded profile follows the distinctive curved Ogee fascia shape, giving the corner a clean, continuous finish rather than leaving cut board edges exposed.\u003c\/p\u003e\n\u003cp\u003eThis is the \u003cstrong\u003estandard 300mm Ogee external corner\u003c\/strong\u003e. It is intended for normal Ogee fascia depths and is different from the larger 600mm double-ended Ogee corner used for deeper roofline applications.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhat Is This Ogee Corner Used For?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing external roofline corners\u003c\/strong\u003e\u003cbr\u003eUsed where two Ogee fascia runs meet around an outward-facing corner of the building.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintaining the decorative Ogee profile\u003c\/strong\u003e\u003cbr\u003eThe shaped lower section follows the curved fascia design so the corner looks consistent with the surrounding boards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovering cut fascia ends\u003c\/strong\u003e\u003cbr\u003eHelps conceal the board junction and creates a much more professional finished appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for standard fascia depths\u003c\/strong\u003e\u003cbr\u003eThe 300mm trim can be cut down where required to suit narrower Ogee fascia boards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e300mm or 600mm Ogee Corner?\u003c\/h3\u003e\n\u003cp\u003eFreefoam offers more than one Ogee external corner, so choosing the correct version matters.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm Ogee External Corner\u003c\/strong\u003e\u003cbr\u003eThe standard corner trim for conventional Ogee fascia widths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600mm Double-Ended Ogee External Corner\u003c\/strong\u003e\u003cbr\u003eDesigned for deeper fascia and specialist double-ended roofline applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \u003cstrong\u003e300mm measurement refers to the length of the trim\u003c\/strong\u003e, not the fascia board width.\u003c\/p\u003e\n\u003ch3\u003eWhy Use a Dedicated Ogee Corner Trim?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile-specific design\u003c\/strong\u003e\u003cbr\u003eMade to match the decorative shape of Freefoam Ogee fascia rather than a plain square fascia profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner external corners\u003c\/strong\u003e\u003cbr\u003eA purpose-made trim gives a tidier result than trying to form the corner entirely from cut fascia boards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo painting or staining is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassic White finish\u003c\/strong\u003e\u003cbr\u003eDesigned to coordinate with the stocked White Freefoam Ogee fascia range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e FOXW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Ogee fascia external corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Ogee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e External roofline corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.09kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e uPVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExternal Corner, Internal Corner or Joint?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee external corner\u003c\/strong\u003e\u003cbr\u003eUsed where the fascia wraps around an outward-facing corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee internal corner\u003c\/strong\u003e\u003cbr\u003eUsed where two fascia runs meet inside a recessed corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee joint \/ joiner\u003c\/strong\u003e\u003cbr\u003eUsed where two Ogee fascia boards meet along the same straight roof run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese accessories are shaped differently, so the correct Ogee trim should be selected for each part of the roofline.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the standard Ogee corner?\u003c\/strong\u003e\u003cbr\u003eYes. This is the 300mm standard Ogee external corner trim for compatible Freefoam Ogee fascia installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as the 600mm Ogee corner?\u003c\/strong\u003e\u003cbr\u003eNo. The 600mm version is a deeper double-ended profile. This 300mm trim is the standard external corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the trim be shortened?\u003c\/strong\u003e\u003cbr\u003eYes. The 300mm profile can be carefully cut down to suit the fascia depth being installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a square fascia corner instead?\u003c\/strong\u003e\u003cbr\u003eNo. Ogee fascia has a moulded curved profile, so a dedicated Ogee corner is required for the correct finished shape.\u003c\/p\u003e\n\u003ch3\u003eA Clean Finish for Standard Ogee Fascia Corners\u003c\/h3\u003e\n\u003cp\u003eThe Freefoam 300mm Ogee uPVC Fascia External Corner Trim is the correct finishing piece for standard Ogee fascia runs turning around an outside corner. It follows the decorative fascia profile, conceals the board junction and helps the complete roofline look properly finished.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57468968862071,"sku":"FOX","price":2.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FOXW_00.jpg?v=1789723817"},{"product_id":"freefoam-300mm-ogee-upvc-fascia-internal-corner-trim-90-degree-decorative-internal-roofline-corner-white","title":"Freefoam 300mm Ogee uPVC Fascia Internal Corner Trim – 90 Degree Decorative Internal Roofline Corner – White","description":"\u003cp\u003eThe Freefoam 300mm Ogee uPVC Fascia Internal Corner Trim is designed to neatly finish a \u003cstrong\u003e90° inward-facing corner\u003c\/strong\u003e where two compatible Freefoam Ogee fascia runs meet. Its shaped profile follows the decorative curved Ogee fascia design, helping the corner look continuous rather than leaving cut board edges exposed.\u003c\/p\u003e\n\n\u003cp\u003eThis is specifically an \u003cstrong\u003einternal Ogee corner\u003c\/strong\u003e, so it is used on recessed roofline corners rather than outward-facing corners. Supplied in White and 300mm long, it can be cut down on site where a shorter section is required.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Is This Ogee Internal Corner Used For?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e90° internal roofline corners\u003c\/strong\u003e\u003cbr\u003eDesigned for recessed or inward-facing corners where two Ogee fascia runs meet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintaining the Ogee profile\u003c\/strong\u003e\u003cbr\u003eThe moulded lower section continues the distinctive decorative fascia shape through the corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovering cut fascia edges\u003c\/strong\u003e\u003cbr\u003eHelps conceal the meeting point between the fascia boards for a cleaner finished installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching White finish\u003c\/strong\u003e\u003cbr\u003eCoordinates with Freefoam White Ogee fascia and compatible roofline products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut to suit\u003c\/strong\u003e\u003cbr\u003eThe 300mm trim can be shortened on site for narrower fascia depths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInternal Corner or External Corner?\u003c\/h3\u003e\n\n\u003cp\u003eThe distinction is simple but important:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee Internal Corner\u003c\/strong\u003e\u003cbr\u003eUsed where two fascia runs meet inside a recessed 90° corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee External Corner\u003c\/strong\u003e\u003cbr\u003eUsed where the fascia wraps around an outward-facing 90° corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee Joint \/ Joiner\u003c\/strong\u003e\u003cbr\u003eUsed where two Ogee fascia boards meet along the same straight roof run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThese trims are profile-specific, so a square fascia corner should not be substituted for an Ogee corner.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Use a Dedicated Ogee Corner Trim?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for the decorative profile\u003c\/strong\u003e\u003cbr\u003eA standard square corner would not follow the moulded Ogee shape correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner finish\u003c\/strong\u003e\u003cbr\u003eCreates a more professional-looking transition around the internal corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo painting or staining is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple roofline detailing\u003c\/strong\u003e\u003cbr\u003eHelps make complicated corners easier to finish neatly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e FOXIW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Ogee fascia internal corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Ogee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner type:\u003c\/strong\u003e 90° internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.07kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e uPVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Internal roofline corner finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this for an external corner?\u003c\/strong\u003e\u003cbr\u003eNo. This trim is designed specifically for inward-facing or recessed Ogee fascia corners.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan the trim be cut down?\u003c\/strong\u003e\u003cbr\u003eYes. The 300mm length can be carefully shortened on site to suit the fascia depth being installed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use this with Square fascia?\u003c\/strong\u003e\u003cbr\u003eNo. This trim is shaped to match the Freefoam Ogee fascia profile.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat colour is this trim?\u003c\/strong\u003e\u003cbr\u003eThis stocked version is supplied in White.\u003c\/p\u003e\n\n\u003ch3\u003eA Neat Finish for Internal Ogee Corners\u003c\/h3\u003e\n\n\u003cp\u003eThe Freefoam 300mm Ogee uPVC Fascia Internal Corner Trim is the correct finishing accessory where a decorative Ogee fascia run turns through a recessed 90° corner. It keeps the moulded profile consistent, hides cut board edges and gives the roofline a much cleaner finished appearance.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57468981805431,"sku":"FOXI","price":2.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FOXIW_01.jpg?v=1789723922"},{"product_id":"freefoam-300mm-ogee-upvc-fascia-joint-trim-joiner-straight-decorative-roofline-connector-white","title":"Freefoam 300mm Ogee uPVC Fascia Joint Trim \/ Joiner – Straight Decorative Roofline Connector – White","description":"\u003cp\u003eThe Freefoam 300mm Ogee uPVC Fascia Joint Trim is designed to neatly finish the straight connection between two compatible Freefoam Ogee fascia boards. Also known as a fascia joiner, it fits over the point where two boards meet end-to-end, concealing the cut edges and continuing the decorative Ogee profile across the roofline.\u003c\/p\u003e\n\n\u003cp\u003eThis is the \u003cstrong\u003estandard 300mm Ogee joint\u003c\/strong\u003e, making it suitable for conventional Ogee fascia depths. It is supplied in White and can be carefully cut down on site where a shorter section is required.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Is This Ogee Fascia Joint Used For?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoining two Ogee fascia boards\u003c\/strong\u003e\u003cbr\u003eUsed where one fascia length finishes and another continues along the same straight roof run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintaining the decorative profile\u003c\/strong\u003e\u003cbr\u003eThe shaped lower section follows the curved Ogee fascia design for a consistent finished appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcealing cut board ends\u003c\/strong\u003e\u003cbr\u003eCovers the meeting point between the two fascia boards rather than leaving the joint exposed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreating a professional roofline finish\u003c\/strong\u003e\u003cbr\u003eA small accessory that makes straight fascia runs look much cleaner and more complete.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eJoint, Corner or End Cap?\u003c\/h3\u003e\n\n\u003cp\u003eThis product is specifically a \u003cstrong\u003estraight fascia joint\u003c\/strong\u003e. It is not used where the roofline changes direction.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee joint \/ joiner\u003c\/strong\u003e\u003cbr\u003eConnects two fascia boards along the same straight roof run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee external corner\u003c\/strong\u003e\u003cbr\u003eUsed where fascia wraps around an outward-facing corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee internal corner\u003c\/strong\u003e\u003cbr\u003eUsed where fascia meets inside a recessed corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd cap\u003c\/strong\u003e\u003cbr\u003eUsed where the fascia run finishes completely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e300mm or 600mm Ogee Joint?\u003c\/h3\u003e\n\n\u003cp\u003eFreefoam also offers a longer 600mm Ogee joint for deeper roofline applications.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm Ogee Joint\u003c\/strong\u003e\u003cbr\u003eThe standard joiner for conventional Ogee fascia depths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600mm Ogee Joint\u003c\/strong\u003e\u003cbr\u003eDesigned for deeper or double-ended Ogee fascia applications where additional coverage is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 300mm measurement refers to the overall length of the trim, not the width of the fascia board.\u003c\/p\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e FOJW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Ogee fascia joint trim \/ fascia joiner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Ogee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Straight fascia board joints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.07kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e uPVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Use a Dedicated Ogee Joiner?\u003c\/h3\u003e\n\n\u003cp\u003eOgee fascia has a shaped decorative lower edge, so a standard square fascia joint will not follow the profile correctly. Using the matching Ogee joiner keeps the curved detail continuous while covering the straight board-to-board connection.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat does this trim do?\u003c\/strong\u003e\u003cbr\u003eIt covers and finishes the straight joint between two compatible Freefoam Ogee fascia boards.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this used on corners?\u003c\/strong\u003e\u003cbr\u003eNo. Separate Ogee internal and external corner trims are available where the fascia changes direction.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan the 300mm joint be cut down?\u003c\/strong\u003e\u003cbr\u003eYes. It can be carefully shortened on site to suit the depth of the fascia being installed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat colour is stocked?\u003c\/strong\u003e\u003cbr\u003eThis 300mm Ogee fascia joint is stocked in White.\u003c\/p\u003e\n\n\u003ch3\u003eA Cleaner Finish Between Ogee Fascia Boards\u003c\/h3\u003e\n\n\u003cp\u003eThe Freefoam 300mm Ogee uPVC Fascia Joint Trim is the correct finishing accessory for connecting standard Ogee fascia boards along a straight roof run. It conceals the board ends, follows the decorative profile and helps give the completed roofline a neat, continuous finish.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57469021094263,"sku":"FOJ","price":2.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FOJW_01.jpg?v=1789724110"},{"product_id":"freefoam-600mm-double-ended-ogee-upvc-fascia-joint-trim-joiner-deep-straight-roofline-connector-white","title":"Freefoam 600mm Double-Ended Ogee uPVC Fascia Joint Trim \/ Joiner – Deep Straight Roofline Connector – White","description":"\u003cp\u003eThe Freefoam 600mm Double-Ended Ogee uPVC Fascia Joint Trim is designed to neatly connect two compatible Ogee fascia boards along the same straight roof run. It covers the meeting point between the boards, hides the cut edges and continues the decorative curved Ogee profile across the joint.\u003c\/p\u003e\n\u003cp\u003eThis is the \u003cstrong\u003e600mm deeper joint option\u003c\/strong\u003e, giving considerably more coverage than the standard 300mm Ogee joiner. It is particularly useful on deeper fascia installations where the shorter joint trim would not be suitable.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWhat Is This Ogee Joint Used For?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoining two Ogee fascia boards\u003c\/strong\u003e\u003cbr\u003eUsed where one fascia length finishes and the next board continues in the same straight direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for deeper fascia applications\u003c\/strong\u003e\u003cbr\u003eThe 600mm profile provides additional coverage compared with the standard 300mm Ogee joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains the decorative Ogee shape\u003c\/strong\u003e\u003cbr\u003eThe moulded lower section follows the fascia profile so the joint looks consistent with the surrounding boards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConceals cut board edges\u003c\/strong\u003e\u003cbr\u003eCreates a cleaner transition rather than leaving the fascia ends visibly butted together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite uPVC finish\u003c\/strong\u003e\u003cbr\u003eMatches the stocked White Freefoam Ogee fascia range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e600mm Ogee Joint vs 300mm Ogee Joint\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm Ogee Joint\u003c\/strong\u003e\u003cbr\u003eThe standard straight joiner for conventional Ogee fascia depths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600mm Double-Ended Ogee Joint\u003c\/strong\u003e\u003cbr\u003eThe longer profile for deeper fascia and specialist roofline details where greater coverage is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 600mm measurement refers to the \u003cstrong\u003eoverall length of the joint trim\u003c\/strong\u003e. It does not mean the fascia board itself must be 600mm wide.\u003c\/p\u003e\n\u003ch3\u003eImportant: This Is a Straight Joint\u003c\/h3\u003e\n\u003cp\u003eThis product is used where two fascia boards meet end-to-end along the same roof run. It is not a corner trim.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee Joint \/ Joiner\u003c\/strong\u003e\u003cbr\u003eConnects two boards along a straight fascia run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee External Corner\u003c\/strong\u003e\u003cbr\u003eUsed where the roofline turns around an outward-facing corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee Internal Corner\u003c\/strong\u003e\u003cbr\u003eUsed where two fascia runs meet inside a recessed corner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e FOJJW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Ogee fascia joint trim \/ joiner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Double-ended Ogee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 600mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.13kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e uPVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Straight joints on deeper Ogee fascia installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Use the Correct Ogee Joiner?\u003c\/h3\u003e\n\u003cp\u003eOgee fascia has a shaped lower edge, so a standard square fascia joint will not follow the decorative profile correctly. Using the matching Freefoam Ogee joiner keeps the moulded detail continuous and gives the finished roofline a much more professional appearance.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the same as the 300mm Ogee joint?\u003c\/strong\u003e\u003cbr\u003eNo. Both are straight fascia joiners, but this 600mm version is designed to provide greater coverage for deeper Ogee fascia applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this an Ogee corner trim?\u003c\/strong\u003e\u003cbr\u003eNo. This product is for straight board-to-board joints. Separate internal and external Ogee corner trims are available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat colour is stocked?\u003c\/strong\u003e\u003cbr\u003eThis 600mm Ogee joint is stocked in White.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be cut down?\u003c\/strong\u003e\u003cbr\u003eYes. The trim can be carefully shortened on site where required to suit the particular fascia installation.\u003c\/p\u003e\n\u003ch3\u003eA Clean Joint for Deeper Ogee Fascia\u003c\/h3\u003e\n\u003cp\u003eThe Freefoam 600mm Double-Ended Ogee Fascia Joint Trim is the correct finishing piece where two deeper Ogee fascia boards meet along a straight roof run. It covers the board junction, maintains the decorative profile and helps the complete roofline look neat and continuous.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57469032366455,"sku":"FOJJ","price":4.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FOJJW_01.jpg?v=1789724185"},{"product_id":"freefoam-300mm-135-degree-ogee-upvc-fascia-external-corner-trim-angled-decorative-roofline-corner-white","title":"Freefoam 300mm 135 Degree Ogee uPVC Fascia External Corner Trim – Angled Decorative Roofline Corner – White","description":"\u003cp\u003eThe Freefoam 300mm 135° Ogee uPVC Fascia External Corner Trim is designed specifically for \u003cstrong\u003eoutward-facing angled corners in Freefoam Ogee fascia installations\u003c\/strong\u003e. Rather than using a standard 90° corner on a splayed roofline, this purpose-made trim follows a 135° change in direction while continuing the distinctive curved Ogee fascia profile.\u003c\/p\u003e\n\n\u003cp\u003eIt covers the meeting point between two Ogee fascia boards, helping conceal cut edges and giving angled sections of the roofline a much cleaner, properly finished appearance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Is This 135° Ogee Corner Used For?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e135° external roofline corners\u003c\/strong\u003e\u003cbr\u003eMade for outward-facing fascia corners that are shallower than a conventional square 90° corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled and splayed roof details\u003c\/strong\u003e\u003cbr\u003eUseful around bay-style projections, angled extensions and other non-square roofline layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains the Ogee fascia shape\u003c\/strong\u003e\u003cbr\u003eThe moulded lower section follows the decorative curved profile rather than interrupting it with a plain square trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers fascia board ends\u003c\/strong\u003e\u003cbr\u003eHelps hide the cut edges where the two fascia runs meet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite uPVC finish\u003c\/strong\u003e\u003cbr\u003eCoordinates with the stocked White Freefoam Ogee fascia system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e135° Ogee Corner or Standard Ogee Corner?\u003c\/h3\u003e\n\n\u003cp\u003eThe angle is the important difference.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Ogee External Corner\u003c\/strong\u003e\u003cbr\u003eUsed on conventional outward-facing 90° roofline corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e135° Ogee External Corner\u003c\/strong\u003e\u003cbr\u003eUsed where the fascia turns through a shallower, angled external corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOgee Internal Corner\u003c\/strong\u003e\u003cbr\u003eUsed where fascia runs meet inside a recessed corner rather than around the outside of the building.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf the roofline does not form a standard square corner, using the correct angled trim avoids trying to adapt a 90° fitting to a shape it was not designed for.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Use a Profile-Specific Ogee Trim?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-made for Ogee fascia\u003c\/strong\u003e\u003cbr\u003eA standard square fascia trim will not properly follow the decorative lower profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner angled junction\u003c\/strong\u003e\u003cbr\u003eCreates a more professional finish than relying on exposed mitred board edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm length\u003c\/strong\u003e\u003cbr\u003eProvides useful coverage and can be carefully cut down where required for the fascia depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo regular painting or staining is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e FOFXW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Ogee fascia external corner trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Ogee\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner angle:\u003c\/strong\u003e 135° external\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e uPVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Angled external Ogee fascia corners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere Would You Typically Use One?\u003c\/h3\u003e\n\n\u003cp\u003eThis fitting is most useful on properties where part of the roofline follows an angled building line. Bay-style sections, splayed extensions and other architectural details can create external corners that are not a conventional 90° angle.\u003c\/p\u003e\n\n\u003cp\u003eThe 135° Ogee corner allows the fascia to follow that change in direction while keeping the decorative roofline profile looking continuous.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this a standard 90° Ogee corner?\u003c\/strong\u003e\u003cbr\u003eNo. This trim is specifically formed for a 135° external corner. A separate standard Ogee corner is available for 90° applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this an internal or external corner?\u003c\/strong\u003e\u003cbr\u003eThis is the external version, designed for a projecting outward-facing angle.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use this with Square fascia?\u003c\/strong\u003e\u003cbr\u003eNo. It is shaped specifically to match the Freefoam Ogee fascia profile.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan the 300mm trim be cut down?\u003c\/strong\u003e\u003cbr\u003eYes. It can be carefully shortened on site where required to suit the fascia depth.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat colour is available?\u003c\/strong\u003e\u003cbr\u003eThis stocked trim is supplied in White.\u003c\/p\u003e\n\n\u003ch3\u003eThe Correct Finish for Angled Ogee Rooflines\u003c\/h3\u003e\n\n\u003cp\u003eThe Freefoam 300mm 135° Ogee uPVC Fascia External Corner Trim is a specialist but important finishing piece for non-square roofline details. It follows the angled corner correctly, maintains the decorative Ogee profile and helps the finished fascia installation look clean and intentional.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57469035577719,"sku":"FOFX","price":5.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FOFXW_01.jpg?v=1789724283"},{"product_id":"freefoam-600mm-roundnose-upvc-fascia-external-corner-trim-90-degree-roofline-corner-white","title":"Freefoam 600mm Roundnose uPVC Fascia External Corner Trim – 90 Degree Roofline Corner – White","description":"\u003cp dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eThe Freefoam 600mm Roundnose External Corner Trim is designed to create a clean, professional finish where two Roundnose fascia boards meet at an outward-facing 90° external corner.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe 600mm length provides additional coverage for deeper fascia installations and can be cut down on site where required. It conceals the cut ends of the fascia boards while maintaining a neat, continuous Roundnose profile around the corner of the roofline.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eManufactured from durable, low-maintenance uPVC and finished in white to match the Freefoam Roundnose fascia range.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor \u003cstrong\u003e90° external roofline corners\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned for \u003cstrong\u003eFreefoam Roundnose fascia boards\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600mm length\u003c\/strong\u003e for deeper fascia applications\u003c\/li\u003e\n\u003cli\u003eCan be cut to the required size\u003c\/li\u003e\n\u003cli\u003eCovers and protects cut fascia board ends\u003c\/li\u003e\n\u003cli\u003eDurable, low-maintenance uPVC\u003c\/li\u003e\n\u003cli\u003eWhite finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Roundnose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e External Corner Trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 600mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e FMRXXW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.15kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57469154787703,"sku":"FMRXXW","price":13.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FMRXXW_00.jpg?v=1789725442"},{"product_id":"freefoam-300mm-roundnose-upvc-fascia-internal-corner-trim-90-degree-roofline-corner-white","title":"Freefoam 300mm Roundnose uPVC Fascia Internal Corner Trim – 90 Degree Roofline Corner – White","description":"\u003cp dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eThe Freefoam 300mm Roundnose Internal Corner Trim is designed to create a clean, professional finish where two Roundnose fascia boards meet at an internal 90° corner.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe trim fits neatly over the adjoining fascia board ends, helping conceal cut edges and maintain a consistent, finished appearance across the roofline. Its 300mm length makes it suitable for standard fascia installations and it can be cut down on site where required.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eManufactured from durable, low-maintenance uPVC and finished in white to coordinate with matching Freefoam Roundnose fascia boards.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 90° internal roofline corners\u003c\/li\u003e\n\u003cli\u003eCompatible with Freefoam Roundnose fascia boards\u003c\/li\u003e\n\u003cli\u003e300mm length\u003c\/li\u003e\n\u003cli\u003eCovers and conceals cut fascia board ends\u003c\/li\u003e\n\u003cli\u003eCan be trimmed to size on site\u003c\/li\u003e\n\u003cli\u003eDurable, low-maintenance uPVC\u003c\/li\u003e\n\u003cli\u003eSmooth white finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eSpecification:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Freefoam\u003c\/li\u003e\n\u003cli\u003eProfile: Roundnose\u003c\/li\u003e\n\u003cli\u003eProduct Type: Internal Corner Trim\u003c\/li\u003e\n\u003cli\u003eLength: 300mm\u003c\/li\u003e\n\u003cli\u003eColour: White\u003c\/li\u003e\n\u003cli\u003eSKU: FMRXIW\u003c\/li\u003e\n\u003cli\u003eWeight: 0.06kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57469302636919,"sku":"FMRXIW","price":13.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FMRXIW_00.jpg?v=1789726143"},{"product_id":"freefoam-600mm-roundnose-upvc-fascia-joint-trim-white","title":"Freefoam 600mm Roundnose uPVC Fascia Joint Trim – White","description":"\u003cdiv class=\"qMYqUG_convSearchResultHighlightRoot\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003csection class=\"text-token-text-primary w-full focus:outline-none has-data-writing-block:pointer-events-none [\u0026amp;:has([data-writing-block])\u0026gt;*]:pointer-events-auto R6Vx5W_threadScrollVars scroll-mb-[calc(var(--scroll-root-safe-area-inset-bottom,0px)+var(--thread-response-height))] scroll-mt-[calc(var(--header-height)+min(200px,max(70px,20svh)))]\" dir=\"auto\"\u003e\n\u003cdiv class=\"text-base my-auto mx-auto pb-8 [--thread-content-margin:var(--thread-content-margin-xs,calc(var(--spacing)*4))] @w-sm\/main:[--thread-content-margin:var(--thread-content-margin-sm,calc(var(--spacing)*6))] @w-lg\/main:[--thread-content-margin:var(--thread-content-margin-lg,calc(var(--spacing)*16))] px-(--thread-content-margin)\"\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\"\u003e\n\u003cdiv class=\"flex max-w-full flex-col gap-4 grow\"\u003e\n\u003cdiv dir=\"auto\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal outline-none keyboard-focused:focus-ring [.text-message+\u0026amp;]:mt-1\" tabindex=\"0\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden\"\u003e\n\u003cdiv class=\"LR5Y_W_content markdown prose dark:prose-invert wrap-break-word w-full light markdown-new-styling\"\u003e\n\u003cp dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eThe \u003cstrong\u003eFreefoam 600mm Roundnose Fascia Joint Trim\u003c\/strong\u003e is designed to create a neat, professional connection between two lengths of Roundnose fascia board.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eIt fits over the adjoining board ends to conceal the joint and maintain a clean, continuous appearance along the roofline. The 600mm length provides generous coverage and can be cut down on site where required.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eManufactured from durable, low-maintenance uPVC and finished in white to match the Freefoam Roundnose fascia range.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for joining \u003cstrong\u003eFreefoam Roundnose fascia boards\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCreates a clean, professional finish between fascia lengths\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e600mm length\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHelps conceal cut board ends and joints\u003c\/li\u003e\n\u003cli\u003eCan be trimmed to size on site\u003c\/li\u003e\n\u003cli\u003eDurable, low-maintenance uPVC\u003c\/li\u003e\n\u003cli\u003eSmooth white finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Roundnose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fascia Joint Trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 600mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e FMRIJW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.13kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"z-0 flex min-h-[46px] justify-start\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"mt-3 w-full empty:hidden has-[\u0026gt;_:empty]:hidden\"\u003e\n\u003cdiv class=\"text-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1\"\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57469324886391,"sku":"FMRJJW","price":13.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FMRJJW_00.jpg?v=1789726235"},{"product_id":"freefoam-300mm-bullnose-upvc-fascia-end-cap-18mm-white","title":"Freefoam 300mm Bullnose uPVC Fascia End Cap – 18mm – White","description":"\u003cp dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eThe Freefoam Bullnose Fascia End Cap is designed to neatly finish the exposed end of an 18mm Bullnose fascia board, covering the cut edge and leaving a clean, professional roofline finish.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003e \u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Freefoam 18mm Bullnose fascia boards\u003c\/li\u003e\n\u003cli\u003eUsed where a fascia board terminates at the end of a roofline run\u003c\/li\u003e\n\u003cli\u003eCovers the exposed cut edge of the fascia board\u003c\/li\u003e\n\u003cli\u003eHelps conceal the cellular uPVC core\u003c\/li\u003e\n\u003cli\u003eCreates a clean, finished appearance\u003c\/li\u003e\n\u003cli\u003e300mm length can be cut down to suit different fascia board widths\u003c\/li\u003e\n\u003cli\u003eManufactured from durable, low-maintenance uPVC\u003c\/li\u003e\n\u003cli\u003eSmooth White finish to match Freefoam roofline products\u003c\/li\u003e\n\u003cli\u003eSuitable for both new-build and refurbishment projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eWhere is it used?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAt the open end of a fascia board\u003c\/li\u003e\n\u003cli\u003eAt the end of a roofline where no corner trim is required\u003c\/li\u003e\n\u003cli\u003eAround gable and verge details where an exposed fascia edge needs finishing\u003c\/li\u003e\n\u003cli\u003eAnywhere the cut end of an 18mm Bullnose fascia would otherwise remain visible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eHow to Install\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the main fascia board first and ensure it is securely fixed to the roof structure\u003c\/li\u003e\n\u003cli\u003eCut the end of the fascia square and clean\u003c\/li\u003e\n\u003cli\u003eMeasure the fascia board width\u003c\/li\u003e\n\u003cli\u003eCut the 300mm end cap down to the required size using a fine-toothed saw\u003c\/li\u003e\n\u003cli\u003eTest-fit the end cap over the exposed end of the fascia\u003c\/li\u003e\n\u003cli\u003ePosition it so it sits flush and neatly covers the cut board edge\u003c\/li\u003e\n\u003cli\u003eSecure using a suitable uPVC-compatible adhesive, following the adhesive manufacturer's instructions\u003c\/li\u003e\n\u003cli\u003eAvoid visible face fixings where possible to maintain a clean finish\u003c\/li\u003e\n\u003cli\u003eRemove any excess adhesive immediately before it cures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003ePlease Note\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a finishing accessory only and does not provide structural support to the fascia board\u003c\/li\u003e\n\u003cli\u003eThe main fascia board should be independently fixed using the correct roofline fixings\u003c\/li\u003e\n\u003cli\u003eCheck compatibility with your chosen Freefoam Bullnose fascia profile before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Fascia End Cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Bullnose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fascia Thickness:\u003c\/strong\u003e 18mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e FMRDCW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.03kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57469342450039,"sku":"FMRDCW","price":13.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FMRDCW_01.jpg?v=1789726346"},{"product_id":"freefoam-600mm-flat-upvc-fascia-external-corner-trim-white","title":"Freefoam 600mm Flat uPVC Fascia External Corner Trim – White","description":"\u003cdiv class=\"qMYqUG_convSearchResultHighlightRoot\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003csection class=\"text-token-text-primary w-full focus:outline-none has-data-writing-block:pointer-events-none [\u0026amp;:has([data-writing-block])\u0026gt;*]:pointer-events-auto R6Vx5W_threadScrollVars scroll-mb-[calc(var(--scroll-root-safe-area-inset-bottom,0px)+var(--thread-response-height))] scroll-mt-[calc(var(--header-height)+min(200px,max(70px,20svh)))]\" dir=\"auto\"\u003e\n\u003cdiv class=\"text-base my-auto mx-auto pb-8 [--thread-content-margin:var(--thread-content-margin-xs,calc(var(--spacing)*4))] @w-sm\/main:[--thread-content-margin:var(--thread-content-margin-sm,calc(var(--spacing)*6))] @w-lg\/main:[--thread-content-margin:var(--thread-content-margin-lg,calc(var(--spacing)*16))] px-(--thread-content-margin)\"\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\"\u003e\n\u003cdiv class=\"flex max-w-full flex-col gap-4 grow\"\u003e\n\u003cdiv dir=\"auto\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal outline-none keyboard-focused:focus-ring [.text-message+\u0026amp;]:mt-1\" tabindex=\"0\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden\"\u003e\n\u003cdiv class=\"LR5Y_W_content markdown prose dark:prose-invert wrap-break-word w-full light markdown-new-styling\"\u003e\n\u003cp dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eThe Freefoam 600mm Flat Fascia External Corner Trim is designed to create a neat, professional finish where two flat fascia boards meet at an external corner. Its double-ended profile covers the cut edges of both fascia runs, removing the need to create a perfectly finished mitred joint on site.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe 600mm length is particularly suited to deeper fascia and box-end applications, including fascia boards over 300mm deep, and can be cut down to the required size during installation. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Freefoam roofline accessory\u003c\/li\u003e\n\u003cli\u003eDesigned for external fascia corners\u003c\/li\u003e\n\u003cli\u003eSuitable for Freefoam flat fascia boards\u003c\/li\u003e\n\u003cli\u003eDouble-ended profile provides a neat finish to both adjoining fascia runs\u003c\/li\u003e\n\u003cli\u003eCovers exposed cut edges and the expansion gap between fascia boards\u003c\/li\u003e\n\u003cli\u003e600mm long – ideal for deeper fascia and box-end details\u003c\/li\u003e\n\u003cli\u003eCan be cut down on site to suit the required fascia depth\u003c\/li\u003e\n\u003cli\u003eDurable, low-maintenance uPVC construction\u003c\/li\u003e\n\u003cli\u003eSmooth White finish\u003c\/li\u003e\n\u003cli\u003eSuitable for new roofline installations and refurbishment projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eWhere is it Used?\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhere two fascia boards meet around an outside corner of a building\u003c\/li\u003e\n\u003cli\u003eTo finish the fascia around projecting roof sections\u003c\/li\u003e\n\u003cli\u003eAround larger box-end details\u003c\/li\u003e\n\u003cli\u003eWhere deeper fascia boards require a corner longer than a standard 300mm trim\u003c\/li\u003e\n\u003cli\u003eTo avoid having exposed or untidy cut fascia edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eHow to Install\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall and securely fix the two fascia boards forming the external corner first.\u003c\/li\u003e\n\u003cli\u003eCut the fascia boards so they meet neatly at the corner while leaving the required allowance for uPVC expansion and contraction.\u003c\/li\u003e\n\u003cli\u003eFreefoam's installation guidance requires an expansion allowance at fascia corners; its fitting literature specifies approximately 6mm at each board end. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMeasure the depth of the fascia or box-end and cut the 600mm corner trim to the required length using a fine-toothed saw or hacksaw.\u003c\/li\u003e\n\u003cli\u003ePosition the trim over the corner so that its two sides cover the cut ends of the adjoining fascia boards.\u003c\/li\u003e\n\u003cli\u003eEnsure the trim sits straight and flush against both fascia faces before fixing.\u003c\/li\u003e\n\u003cli\u003eThe corner trim should be secured to one fascia board only, allowing the other board to move naturally with changes in temperature. Freefoam's certified installation guidance specifies fixing the corner trim to one board in the same manner as a fascia joiner rather than rigidly locking both boards together. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eA suitable low-modulus neutral-cure silicone can be used as part of the fixing\/detailing arrangement while still allowing the uPVC to expand and contract. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCheck the finished corner is straight and that the trim completely conceals the board ends and expansion gap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003ePlease Note\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a finishing trim, not a structural fixing for the fascia.\u003c\/li\u003e\n\u003cli\u003eBoth fascia boards must be independently and securely fixed to suitable timber\/support before fitting the corner.\u003c\/li\u003e\n\u003cli\u003eDo not rigidly fix both sides of the corner in a way that prevents normal thermal movement of the uPVC.\u003c\/li\u003e\n\u003cli\u003eThe 600mm version is particularly useful for \u003cstrong\u003efascia boards over 300mm deep\u003c\/strong\u003e. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e External Fascia Corner Trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e uPVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 600mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e FFMXXW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.29kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1\"\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57469422109047,"sku":"FFMXXW","price":13.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FFMXXW_00.jpg?v=1789726800"},{"product_id":"freefoam-600mm-flat-upvc-fascia-joint-trim-white","title":"Freefoam 600mm Flat uPVC Fascia Joint Trim – White","description":"\u003cdiv class=\"qMYqUG_convSearchResultHighlightRoot\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003csection class=\"text-token-text-primary w-full focus:outline-none has-data-writing-block:pointer-events-none [\u0026amp;:has([data-writing-block])\u0026gt;*]:pointer-events-auto R6Vx5W_threadScrollVars scroll-mb-[calc(var(--scroll-root-safe-area-inset-bottom,0px)+var(--thread-response-height))] scroll-mt-[calc(var(--header-height)+min(200px,max(70px,20svh)))]\" dir=\"auto\"\u003e\n\u003cdiv class=\"text-base my-auto mx-auto pb-8 [--thread-content-margin:var(--thread-content-margin-xs,calc(var(--spacing)*4))] @w-sm\/main:[--thread-content-margin:var(--thread-content-margin-sm,calc(var(--spacing)*6))] @w-lg\/main:[--thread-content-margin:var(--thread-content-margin-lg,calc(var(--spacing)*16))] px-(--thread-content-margin)\"\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\"\u003e\n\u003cdiv class=\"flex max-w-full flex-col gap-4 grow\"\u003e\n\u003cdiv dir=\"auto\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal outline-none keyboard-focused:focus-ring [.text-message+\u0026amp;]:mt-1\" tabindex=\"0\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden\"\u003e\n\u003cdiv class=\"LR5Y_W_content markdown prose dark:prose-invert wrap-break-word w-full light markdown-new-styling\"\u003e\n\u003cp dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eThe Freefoam 600mm Flat Fascia Joint Trim is designed to create a clean, professional connection between two lengths of Freefoam flat fascia board. It fits over the adjoining board ends, concealing the joint and helping maintain a neat, continuous finish along the roofline. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe generous 600mm length makes this joint particularly useful for deeper fascia boards and larger box-end details, while allowing the trim to be cut down on site to suit the required board width.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for joining Freefoam Flat fascia boards\u003c\/li\u003e\n\u003cli\u003eCreates a neat finish where two fascia lengths meet end-to-end\u003c\/li\u003e\n\u003cli\u003eCovers the cut edges of both fascia boards\u003c\/li\u003e\n\u003cli\u003eHelps conceal the required expansion gap between adjoining boards\u003c\/li\u003e\n\u003cli\u003e600mm length – suitable for deeper fascia and box-end applications\u003c\/li\u003e\n\u003cli\u003eCan be cut down to match the fascia board width\u003c\/li\u003e\n\u003cli\u003eDurable, low-maintenance uPVC construction\u003c\/li\u003e\n\u003cli\u003eSmooth White finish\u003c\/li\u003e\n\u003cli\u003eSuitable for new-build and refurbishment roofline installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eWhere is it Used?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBetween two separate lengths of fascia board installed in a straight run\u003c\/li\u003e\n\u003cli\u003eWhere a roofline is longer than a single fascia board\u003c\/li\u003e\n\u003cli\u003eOn deep fascia installations where a longer joint trim is required\u003c\/li\u003e\n\u003cli\u003eAround larger box-end and roofline details\u003c\/li\u003e\n\u003cli\u003eAnywhere two flat fascia boards require a neat, weather-resistant finished joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eHow to Install\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSecure both fascia boards to the roof structure using the appropriate fascia fixings.\u003c\/li\u003e\n\u003cli\u003ePosition the ends of the two fascia boards so that they meet at the required joint location.\u003c\/li\u003e\n\u003cli\u003eAllow sufficient space between the board ends for the normal thermal expansion and contraction of uPVC.\u003c\/li\u003e\n\u003cli\u003eMeasure the fascia depth and cut the 600mm joint trim to the required length using a fine-toothed saw.\u003c\/li\u003e\n\u003cli\u003ePosition the joint trim centrally over the meeting point of the two fascia boards.\u003c\/li\u003e\n\u003cli\u003eThe profile should sit over the front faces and lower edges of the boards, concealing the cut ends and expansion gap.\u003c\/li\u003e\n\u003cli\u003eMake sure the joint is straight and fully seated before securing.\u003c\/li\u003e\n\u003cli\u003eAvoid rigidly locking both fascia boards together through the joint, as the boards need to retain the ability to expand and contract with temperature changes.\u003c\/li\u003e\n\u003cli\u003eOnce installed, the trim should leave a clean, continuous appearance with no exposed fascia core visible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003ePlease Note\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a joining and finishing accessory, not a structural fascia fixing.\u003c\/li\u003e\n\u003cli\u003eEach fascia board must be independently and securely fixed to the supporting structure.\u003c\/li\u003e\n\u003cli\u003eThe joint trim should not be used to pull poorly aligned fascia boards together.\u003c\/li\u003e\n\u003cli\u003eAlways maintain the appropriate expansion allowance when joining uPVC fascia boards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eSpecification\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Freefoam\u003c\/li\u003e\n\u003cli\u003eProduct Type: Fascia Joint Trim\u003c\/li\u003e\n\u003cli\u003eProfile: Flat\u003c\/li\u003e\n\u003cli\u003eMaterial: uPVC\u003c\/li\u003e\n\u003cli\u003eLength: 600mm\u003c\/li\u003e\n\u003cli\u003eColour: White\u003c\/li\u003e\n\u003cli\u003eSKU: FFMJJW\u003c\/li\u003e\n\u003cli\u003eWeight: 0.29kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57469436297591,"sku":"FFMJJW","price":13.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FFMJJW_01.jpg?v=1789726884"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/collections\/FFMXXW_00.jpg?v=1789729657","url":"https:\/\/tradewarehouse.co.uk\/collections\/freefoam-joints-and-corners.oembed","provider":"Trade Warehouse","version":"1.0","type":"link"}