{"title":"PVC Soffit Trims","description":null,"products":[{"product_id":"freefoam-5m-upvc-hollow-soffit-external-corner-trim-white","title":"Freefoam 5m uPVC Hollow Soffit External Corner Trim – White","description":"\u003cp dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eThe \u003cstrong\u003eFreefoam 5m External Corner Trim\u003c\/strong\u003e is designed for finishing \u003cstrong\u003eexternal 90° corners in hollow soffit installations\u003c\/strong\u003e, allowing soffit boards to turn neatly around projecting corners while maintaining a clean, continuous roofline finish.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe profile provides a formed corner channel for the adjoining soffit boards, helping conceal cut edges and creating a much neater result than trying to butt or mitre the boards together.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for \u003cstrong\u003eFreefoam hollow soffit systems\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUsed to form neat \u003cstrong\u003eexternal 90° soffit corners\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAllows two soffit runs to meet cleanly around a projecting corner\u003c\/li\u003e\n\u003cli\u003eConceals the cut edges of adjoining soffit boards\u003c\/li\u003e\n\u003cli\u003eProvides a straight, consistent corner detail\u003c\/li\u003e\n\u003cli\u003eFull \u003cstrong\u003e5 metre length\u003c\/strong\u003e for long runs with fewer joints\u003c\/li\u003e\n\u003cli\u003eCan be cut to the required length on site\u003c\/li\u003e\n\u003cli\u003eDurable, low-maintenance \u003cstrong\u003euPVC construction\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSmooth \u003cstrong\u003eWhite\u003c\/strong\u003e finish\u003c\/li\u003e\n\u003cli\u003eSuitable for new-build and refurbishment roofline projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWhere is it Used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhere a soffit needs to turn around an \u003cstrong\u003eoutside corner of a building\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAround projecting roof sections, extensions and bay areas\u003c\/li\u003e\n\u003cli\u003eAt external corners beneath fascia and bargeboard installations\u003c\/li\u003e\n\u003cli\u003eAnywhere two hollow soffit runs meet at approximately \u003cstrong\u003e90°\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eHow to Install\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure the external corner and cut the trim to the required length using a \u003cstrong\u003efine-toothed saw\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003ePosition the corner trim along the external corner before completing the adjoining soffit boards.\u003c\/li\u003e\n\u003cli\u003eEnsure the central corner of the trim is aligned accurately with the building corner.\u003c\/li\u003e\n\u003cli\u003eSecure the trim to a suitable \u003cstrong\u003etimber or roofline substrate\u003c\/strong\u003e, keeping it straight along its full length.\u003c\/li\u003e\n\u003cli\u003eCut the adjoining hollow soffit boards neatly to length.\u003c\/li\u003e\n\u003cli\u003eInsert the edge of each soffit board into the corresponding \u003cstrong\u003echannel on either side of the corner trim\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eLeave the appropriate allowance for normal \u003cstrong\u003euPVC expansion and contraction\u003c\/strong\u003e rather than forcing the boards tightly into the profile.\u003c\/li\u003e\n\u003cli\u003eContinue fixing the soffit boards in accordance with the main soffit installation requirements.\u003c\/li\u003e\n\u003cli\u003eCheck that both sides remain fully engaged in the trim and that the visible corner runs straight before completing the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003ePlease Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis is an \u003cstrong\u003eexternal corner trim\u003c\/strong\u003e – it is not intended for internal\/re-entrant corners.\u003c\/li\u003e\n\u003cli\u003eIt is primarily a \u003cstrong\u003esoffit finishing profile\u003c\/strong\u003e, rather than a fascia corner.\u003c\/li\u003e\n\u003cli\u003eThe trim itself does not replace the structural support required behind the soffit boards.\u003c\/li\u003e\n\u003cli\u003eAlways allow for normal thermal movement when installing uPVC roofline products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e External Corner Trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Hollow Soffit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e uPVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5m \/ 5000mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e F108W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.65kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57469546561911,"sku":"F108W","price":13.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/F108W_00_004b80fc-6f80-4f6b-8d76-0b0a24c6362d.jpg?v=1789727255"},{"product_id":"freefoam-5m-upvc-soffit-joint-trim-h-section-joiner-straight-soffit-board-connector-all-colours","title":"Freefoam 5m uPVC Soffit Joint Trim \/ H-Section Joiner – Straight Soffit Board Connector – All Colours","description":"\u003cp\u003eThe Freefoam 5m uPVC Soffit Joint Trim, also known as an H-section soffit joiner, is designed to create a neat straight connection where two compatible soffit boards meet end-to-end. Instead of leaving an exposed butt joint, the F106 profile receives the edge of each board and gives the underside of the roofline a cleaner, more professional finish.\u003c\/p\u003e\n\u003cp\u003eSupplied in a full 5 metre length, the trim can be cut on site to suit the installation and is available in a range of matching Freefoam colours and woodgrain finishes.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhy Use the Freefoam F106 Soffit Joint Trim?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoins soffit boards on a straight run\u003c\/strong\u003e\u003cbr\u003eDesigned specifically for situations where one soffit board finishes and another continues in the same direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreates a tidy H-section joint\u003c\/strong\u003e\u003cbr\u003eThe profile accepts a board from each side, helping conceal the meeting point between the two soffit sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull 5 metre length\u003c\/strong\u003e\u003cbr\u003eCan be cut down on site to create the individual joint pieces required for the project.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllows for uPVC movement\u003c\/strong\u003e\u003cbr\u003eDesigned to be used with the correct expansion allowance so the boards can naturally expand and contract.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching colour options\u003c\/strong\u003e\u003cbr\u003eAvailable in White, contemporary greys and blacks, plus traditional woodgrain finishes to coordinate with the soffit boards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo painting, staining or regular timber treatment is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhat Is This Trim Used For?\u003c\/h3\u003e\n\u003cp\u003eThe F106 is a \u003cstrong\u003estraight soffit board joiner\u003c\/strong\u003e. It is used where two boards need to meet end-to-end beneath the eaves.\u003c\/p\u003e\n\u003cp\u003eIt is not a corner trim or an edge finishing trim. If the soffit is changing direction or finishing against a wall, a different Freefoam soffit trim may be required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eImportant Expansion Gap\u003c\/h3\u003e\n\u003cp\u003euPVC expands and contracts as temperatures change, so the correct movement allowance should be left when fitting the boards.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAt a board end:\u003c\/strong\u003e allow approximately 6mm expansion clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhere two boards meet in the F106 joiner:\u003c\/strong\u003e allow approximately 12mm total clearance between the board ends.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis movement allowance is important for helping prevent the soffit boards from becoming tight or distorted after installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHow Is the Soffit Joint Trim Installed?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCut the F106 trim to the required soffit depth.\u003c\/li\u003e\n\u003cli\u003ePosition the joiner where the two soffit boards will meet.\u003c\/li\u003e\n\u003cli\u003eInsert one board into each side of the H-section profile.\u003c\/li\u003e\n\u003cli\u003eMaintain the required expansion clearance between the board ends.\u003c\/li\u003e\n\u003cli\u003eMake sure the soffit boards and trim are properly supported by the roofline structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code family:\u003c\/strong\u003e F106\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC soffit joint trim \/ H-section joiner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5000mm \/ 5m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.65kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Straight soffit board joints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the F106 soffit trim actually do?\u003c\/strong\u003e\u003cbr\u003eIt joins two soffit boards together along a straight run and covers the connection between them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need one for every soffit board?\u003c\/strong\u003e\u003cbr\u003eNo. It is only required where two board lengths need to meet end-to-end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 5m trim be cut?\u003c\/strong\u003e\u003cbr\u003eYes. It is designed to be cut on site to suit the soffit depth and number of joints required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much expansion gap should I leave?\u003c\/strong\u003e\u003cbr\u003eAllow approximately 6mm at a board end, or 12mm total when two boards meet within the joiner.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"White","offer_id":57474439872887,"sku":"F106","price":7.08,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey Foil","offer_id":57474439905655,"sku":"F106WGAG","price":14.2,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57474439938423,"sku":"F106WGB","price":14.2,"currency_code":"GBP","in_stock":true},{"title":"Cream Foil","offer_id":57474439971191,"sku":"F106WGCR","price":14.2,"currency_code":"GBP","in_stock":true},{"title":"Irish Oak","offer_id":57474440003959,"sku":"F106WGI","price":14.2,"currency_code":"GBP","in_stock":true},{"title":"Light Oak","offer_id":57474440036727,"sku":"F106WGO","price":14.2,"currency_code":"GBP","in_stock":true},{"title":"Mahogany","offer_id":57474440069495,"sku":"F106WGM","price":14.2,"currency_code":"GBP","in_stock":true},{"title":"Rosewood","offer_id":57474440102263,"sku":"F106WGR","price":14.2,"currency_code":"GBP","in_stock":true},{"title":"Smooth Foil Anthracite Grey","offer_id":57474440135031,"sku":"F106WGSMAG","price":15.62,"currency_code":"GBP","in_stock":true},{"title":"Smooth Foil Matt Black","offer_id":57474440167799,"sku":"F106WGSMBL","price":15.62,"currency_code":"GBP","in_stock":true},{"title":"Agate Grey Foil RAL 7038","offer_id":57474440200567,"sku":"SJTAGG","price":14.2,"currency_code":"GBP","in_stock":true},{"title":"Chartwell Green Foil","offer_id":57474440233335,"sku":"SJTCGF","price":14.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/F106W_00.jpg?v=1789901192"},{"product_id":"freefoam-5m-upvc-j-trim-soffit-starter-edge-finishing-trim-30mm-x-10mm-all-colours","title":"Freefoam 5m uPVC J Trim – Soffit Starter \u0026 Edge Finishing Trim 30mm x 10mm – All Colours","description":"\u003ch3\u003eFreefoam 5m uPVC J Trim \/ Soffit Starter \u0026amp; Edge Trim – 30mm x 10mm – All Colours\u003c\/h3\u003e\n\n\u003cp\u003eThe Freefoam F107 uPVC J Trim is a 5 metre starter and edge trim used to create a clean finished edge around compatible Freefoam soffit installations. Rather than joining two boards together like the F106 H-section joint, this J-shaped profile receives the edge of a soffit board where the installation starts, finishes or terminates against another surface.\u003c\/p\u003e\n\n\u003cp\u003eIt is suitable for use with Freefoam \u003cstrong\u003eGeneral Purpose Soffit Board and Hollow Soffit\u003c\/strong\u003e, making it a useful finishing trim for new rooflines, replacement soffits, extensions and other eaves work.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Use the Freefoam F107 J Trim?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishes exposed soffit board edges\u003c\/strong\u003e\u003cbr\u003eCreates a clean perimeter where a soffit board would otherwise finish with a visible cut edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks as a soffit starter trim\u003c\/strong\u003e\u003cbr\u003eProvides a neat receiving channel at the beginning or termination of the soffit installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with solid and hollow soffit\u003c\/strong\u003e\u003cbr\u003eSuitable for Freefoam General Purpose Board and Hollow Soffit systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 metre continuous length\u003c\/strong\u003e\u003cbr\u003eIdeal for long roof runs and can be cut down on site to suit the exact installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30mm x 10mm profile\u003c\/strong\u003e\u003cbr\u003eCompact J-section designed to neatly accommodate compatible Freefoam boards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching finishes available\u003c\/strong\u003e\u003cbr\u003eAvailable in selected solid, foil, smooth foil and woodgrain colours to coordinate with the surrounding roofline.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo painting, staining or timber treatment required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat Is a J Trim Actually Used For?\u003c\/h3\u003e\n\n\u003cp\u003eThe easiest way to think about the F107 is as an \u003cstrong\u003eedge finishing channel\u003c\/strong\u003e. The soffit board slides into the J-shaped section, hiding the cut edge and giving the perimeter of the soffit a much tidier appearance.\u003c\/p\u003e\n\n\u003cp\u003eTypical locations include the rear edge of the soffit near the external wall, the beginning or end of a soffit run, and other details where a board edge needs to be neatly enclosed.\u003c\/p\u003e\n\n\u003ch3\u003eJ Trim vs Soffit Joint Trim\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eF107 J Trim\u003c\/strong\u003e\u003cbr\u003eUsed at the edge, start or termination of a soffit board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF106 Soffit Joint \/ H Joiner\u003c\/strong\u003e\u003cbr\u003eUsed where two soffit boards meet end-to-end along a straight run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThey perform different jobs, so a J trim should not be used as a substitute for a straight soffit joiner.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eMeasure and cut the J trim to the required roofline length.\u003c\/li\u003e\n\u003cli\u003eFix the trim securely to the supporting structure before inserting the soffit board.\u003c\/li\u003e\n\u003cli\u003eSlide the edge of the soffit into the J-section for a neat concealed finish.\u003c\/li\u003e\n\u003cli\u003eAllow appropriate clearance for normal uPVC expansion and contraction.\u003c\/li\u003e\n\u003cli\u003eKeep the trim straight during fixing so the finished soffit edge remains consistent along the roof run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code family:\u003c\/strong\u003e F107\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC J trim \/ soffit starter and edge trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5000mm \/ 5m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 10mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.55kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Freefoam General Purpose Board and Hollow Soffit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this used to join two soffit boards together?\u003c\/strong\u003e\u003cbr\u003eNo. For a straight board-to-board connection, use the Freefoam F106 soffit joint trim. The F107 is primarily a starter and edge finishing trim.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use it with Hollow Soffit?\u003c\/strong\u003e\u003cbr\u003eYes. Freefoam specifies the F107 J-section trim for use with both General Purpose Board and Hollow Soffit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan the 5m trim be shortened?\u003c\/strong\u003e\u003cbr\u003eYes. It can be cut on site to suit the required roofline length or individual detail.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this only a soffit trim?\u003c\/strong\u003e\u003cbr\u003eThe F107 is a universal Freefoam J-section profile and can also be used in certain compatible cladding details, but for roofline work its main role is as a soffit starter and edge trim.\u003c\/p\u003e\n\n\u003ch3\u003eA Simple Trim That Makes the Soffit Look Finished\u003c\/h3\u003e\n\n\u003cp\u003eThe Freefoam F107 5m J Trim is one of those small roofline components that makes a noticeable difference to the finished job. It neatly encloses soffit board edges, provides a proper starting or finishing channel and helps produce the clean, straight perimeter expected from a professional uPVC soffit installation.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"Anthracite Grey Foil","offer_id":57474451177847,"sku":"F107WGAG","price":12.47,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57474451210615,"sku":"F107WGB","price":12.47,"currency_code":"GBP","in_stock":true},{"title":"Light Oak","offer_id":57474451243383,"sku":"F107WGO","price":12.47,"currency_code":"GBP","in_stock":true},{"title":"Rosewood","offer_id":57474451276151,"sku":"F107WGR","price":12.47,"currency_code":"GBP","in_stock":true},{"title":"Smooth Foil Anthracite Grey","offer_id":57474451308919,"sku":"F107WGSMAG","price":13.7,"currency_code":"GBP","in_stock":true},{"title":"Smooth Foil Matt Black","offer_id":57474451341687,"sku":"F107WGSMBL","price":13.7,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":57474451374455,"sku":"F107","price":5.22,"currency_code":"GBP","in_stock":true},{"title":"Agate Grey Foil RAL 7038","offer_id":57474451407223,"sku":"F107WGATE","price":12.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/HSTW_00.jpg?v=1789901842"},{"product_id":"freefoam-f109-5m-upvc-soffit-ventilation-strip-h-vent-25mm-continuous-eaves-vent-white","title":"Freefoam F109 5m uPVC Soffit Ventilation Strip \/ H-Vent – 25mm Continuous Eaves Vent – White","description":"\u003cp\u003eThe Freefoam F109 5m uPVC Soffit Ventilation Strip is designed to introduce continuous airflow into the roof space through a solid soffit installation. It is used alongside Freefoam General Purpose Board where ventilation is required, providing a neat linear vent within the soffit rather than relying on separate circular vents.\u003c\/p\u003e\n\u003cp\u003eThe F109 profile is equivalent to \u003cstrong\u003e25mm continuous ventilation\u003c\/strong\u003e, making it a useful option for roofline installations that require a higher level of eaves airflow. Supplied in a full 5 metre length, it can be cut on site to suit the roof run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhy Choose the Freefoam F109 Vent Strip?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquivalent to 25mm continuous ventilation\u003c\/strong\u003e\u003cbr\u003eProvides a continuous airflow path along the eaves when installed correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for use with Freefoam General Purpose Board\u003c\/strong\u003e\u003cbr\u003eA purpose-made ventilation accessory for solid soffit installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner than individual circular vents\u003c\/strong\u003e\u003cbr\u003eCreates one continuous ventilated strip rather than multiple separate vent holes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull 5 metre length\u003c\/strong\u003e\u003cbr\u003eIdeal for longer roof runs and can be cut down on site where required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated soffit solution\u003c\/strong\u003e\u003cbr\u003eAllows you to use standard solid General Purpose Board while adding dedicated ventilation where needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo painting, staining or ongoing timber treatment is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhat Is This Vent Strip Used For?\u003c\/h3\u003e\n\u003cp\u003eThe F109 is fitted within the soffit line to allow outside air to enter the roof space at eaves level. This helps provide the airflow needed to reduce the risk of moisture becoming trapped within the roof void.\u003c\/p\u003e\n\u003cp\u003eIt is particularly useful where you want to use Freefoam's solid General Purpose Soffit Board but the roof design still requires dedicated eaves ventilation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eF109 Vent Strip vs Pre-Vented Soffit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eF109 Soffit Vent Strip\u003c\/strong\u003e\u003cbr\u003eUsed with separate solid soffit boards to introduce a continuous ventilated section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Vented General Purpose Board\u003c\/strong\u003e\u003cbr\u003eHas ventilation slots already formed directly into the soffit board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth can provide roofline ventilation, but the F109 gives you the flexibility to position a dedicated ventilated strip within an otherwise solid soffit installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eInstallation Guidance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the vent strip as part of the soffit run in conjunction with compatible Freefoam General Purpose Board.\u003c\/li\u003e\n\u003cli\u003eProvide suitable support behind the soffit and ventilation profile.\u003c\/li\u003e\n\u003cli\u003eKeep the ventilation slots clear of insulation, trims and other obstructions.\u003c\/li\u003e\n\u003cli\u003eCut the 5m profile carefully to suit the required roof run.\u003c\/li\u003e\n\u003cli\u003eFollow the roof design and Freefoam guidance to ensure the required ventilation provision is achieved.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e F109W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC soffit ventilation strip \/ H-vent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 5000mm \/ 5m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 1.24kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation:\u003c\/strong\u003e Equivalent to 25mm continuous ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Ventilated soffit and eaves installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Freefoam General Purpose Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the F109 vent strip actually do?\u003c\/strong\u003e\u003cbr\u003eIt creates a continuous ventilated section within the soffit, allowing airflow into the roof space at eaves level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it with solid soffit board?\u003c\/strong\u003e\u003cbr\u003eYes. That is one of its main uses. It is designed to work with Freefoam General Purpose Board where additional ventilation is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much ventilation does it provide?\u003c\/strong\u003e\u003cbr\u003eFreefoam specifies the F109 as equivalent to 25mm continuous ventilation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it the same as pre-vented soffit?\u003c\/strong\u003e\u003cbr\u003eNo. Pre-vented soffit has slots built directly into the board. The F109 is a separate ventilation strip fitted within the soffit system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 5m strip be cut?\u003c\/strong\u003e\u003cbr\u003eYes. It can be cut on site to suit the required roofline length.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"Default Title","offer_id":57474461270391,"sku":"F109W","price":48.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/F109W_01.jpg?v=1789902370"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/collections\/F106W_00.jpg?v=1789998251","url":"https:\/\/tradewarehouse.co.uk\/collections\/pvc-soffit-trims.oembed","provider":"Trade Warehouse","version":"1.0","type":"link"}