{"product_id":"freefoam-300mm-square-upvc-fascia-end-cap-exposed-roofline-end-finishing-trim-all-colours","title":"Freefoam 300mm Square uPVC Fascia End Cap – Exposed Roofline End Finishing Trim – All Colours","description":"\u003cp\u003eThe Freefoam 300mm Square uPVC Fascia End Cap is designed to neatly finish an exposed end of a compatible Freefoam fascia run. Rather than leaving the cut end of the fascia board visible, the end cap fits over the open edge to create a clean, colour-matched finish at the end of the roofline.\u003c\/p\u003e\n\u003cp\u003eIt is a small finishing component, but an important one where the fascia terminates rather than continuing into a joint or around a corner. Supplied at 300mm long, the trim can be cut down on site to suit the depth of the fascia board being installed.\u003c\/p\u003e\n\u003ch3\u003eWhat Is This Fascia End Cap Used For?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing an exposed fascia end\u003c\/strong\u003e\u003cbr\u003eUsed where a fascia run stops and the cut end of the board would otherwise remain visible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreates a cleaner roofline finish\u003c\/strong\u003e\u003cbr\u003eCovers the open board edge and gives the installation a more complete, professional appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300mm length\u003c\/strong\u003e\u003cbr\u003eProvides enough material for a wide range of fascia depths and can be trimmed down where required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-matched finish\u003c\/strong\u003e\u003cbr\u003eAvailable in coordinating Freefoam finishes so the end cap blends with the surrounding fascia.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-maintenance uPVC\u003c\/strong\u003e\u003cbr\u003eNo painting or staining is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhere Would You Use an End Cap?\u003c\/h3\u003e\n\u003cp\u003eAn end cap is used at the point where the fascia board finishes completely. Typical examples include the end of a roof run, certain gable or verge details, garages, porches, extensions and other roofline sections where the fascia does not continue into another board.\u003c\/p\u003e\n\u003cp\u003eIt is designed to hide the exposed board end rather than join two fascia boards together.\u003c\/p\u003e\n\u003ch3\u003eEnd Cap, Joint or Corner?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFascia end cap\u003c\/strong\u003e\u003cbr\u003eFinishes the exposed end of a fascia board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFascia joint \/ joiner\u003c\/strong\u003e\u003cbr\u003eConnects and finishes two fascia boards meeting end-to-end along a straight run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal corner\u003c\/strong\u003e\u003cbr\u003eUsed where fascia wraps around an outward-facing corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal corner\u003c\/strong\u003e\u003cbr\u003eUsed where fascia runs meet inside a recessed corner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the fascia simply stops and you can see the cut edge, this is the type of trim you need.\u003c\/p\u003e\n\u003ch3\u003eAvailable Colours\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWhite\u003c\/li\u003e\n\u003cli\u003eAnthracite Grey Foil\u003c\/li\u003e\n\u003cli\u003eBlack Ash\u003c\/li\u003e\n\u003cli\u003eRosewood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freefoam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e uPVC fascia end cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Square fascia finishing trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 300mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 0.04kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Finishing exposed fascia board ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be cut:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Use the Proper Fascia End Cap?\u003c\/h3\u003e\n\u003cp\u003eLeaving the cut end of a fascia board exposed can make an otherwise tidy roofline look unfinished. A purpose-made end cap conceals that edge and continues the colour and finish around the end of the board.\u003c\/p\u003e\n\u003cp\u003eBecause the trim is supplied at 300mm, it can be measured against the fascia depth and carefully shortened on site before fitting.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this fascia end cap do?\u003c\/strong\u003e\u003cbr\u003eIt covers and finishes the exposed end of a compatible square fascia board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this used to join two fascia boards?\u003c\/strong\u003e\u003cbr\u003eNo. A fascia joint or joiner is used between two boards. This product is specifically for the end of a fascia run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the fascia need to be 300mm wide?\u003c\/strong\u003e\u003cbr\u003eNo. The 300mm measurement refers to the length of the end cap. It can be cut down to suit narrower fascia depths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I match it to coloured fascia?\u003c\/strong\u003e\u003cbr\u003eYes. Matching White, Anthracite Grey Foil, Black Ash and Rosewood options are available within this stocked range.\u003c\/p\u003e\n\u003ch3\u003eThe Finishing Touch for Exposed Fascia Ends\u003c\/h3\u003e\n\u003cp\u003eThe Freefoam 300mm Square uPVC Fascia End Cap gives the end of a roofline the neat finish it needs. It hides the cut board edge, matches the surrounding fascia and can be trimmed to suit the required depth, making it a simple but essential finishing accessory for a professional-looking installation.\u003c\/p\u003e","brand":"NBP","offers":[{"title":"White","offer_id":57468887695735,"sku":"FWDCW","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Anthracite Grey Foil","offer_id":57468887728503,"sku":"FWDCWGAG","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Black Ash","offer_id":57468887761271,"sku":"FWDCWGB","price":13.49,"currency_code":"GBP","in_stock":true},{"title":"Rosewood","offer_id":57468887794039,"sku":"FWDCWGR","price":13.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/7366\/4054\/files\/FWDCW_00.jpg?v=1789723338","url":"https:\/\/tradewarehouse.co.uk\/products\/freefoam-300mm-square-upvc-fascia-end-cap-exposed-roofline-end-finishing-trim-all-colours","provider":"Trade Warehouse","version":"1.0","type":"link"}