Cast Iron 4" Plain Half Round Gutter Internal Stopend Painted

Internal stopends are used to be fitted internally within the larger socket end of a gutter fitting or gutter length. For jointing please either use low modulus silicone sealant with bright zinc plated M6 x 25mm nut, bolt & washer

External stopends are designed to be fitted externally over the smaller spigot end of a gutter length. For jointing please either use low modulus silicone sealant with bright zinc plated M6 x 25mm nut, bolt & washer.

Beneifts of using this cast iron guttering:

• Beautifully made traditional sand cast iron
• Next working day shipping
• Life expectancy of over 100 years when maintained correctly
• Complies with all Listed Building, Heritage and Conservation requirements
• Supplied Transit Primed or Factory applied wet paint finish in semi-gloss black or to a specific RAL/BS colour on request
• Free samples are available and a quotation
• Manufactured to BS460:1964.

Rafter Top-Fix, Side-Fix or Rise and Fall brackets to be fitted onto rafter ends at a maximum centre of 915mm. Expansion gaps of 3-4mm should be left within sockets. Joints to be made with the gutter jointing kit (sold by Trade Warehouse) or by applying two beads of Dow Corning 791 Sealant into the gutter socket and securing using the M6 x 25mm bolts, neoprene washers and nuts.

Full fitting instructions supplied with every delivery. Gutters, downpipes and fittings, particularly with a painted finish, should be handled with care and should preferably be stored under cover on racks to prevent scratching. To maximise the life of the decorative paint finishes, all parts should be washed down with clean water at least every 12 months and any damage repaired.